We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Canon RS-LP12 projector lamp module with housing

Canon

Canon RS-LP12 270W Projector Lamp with Housing

SKU CH-YPY9-6MA1F

A 270 W NSH projector lamp module with housing, rated for 2,000 hours of operation

  • TypeNSH
  • Wattage270W
  • Lamp Life2,000 hrs
  • Ready-to-install lamp module simplifies projector maintenance
  • Genuine NSH 270W bulb delivers correct brightness for Canon projectors
  • Rated 2,000 hours lamp life supports extended use between replacements
  • Manufactured to ISO 9001 quality standards for reliable performance
  • Includes housing and bulb pre-assembled for immediate installation

Canon RS-LP12 270W lamp module

The Canon RS-LP12 is a complete replacement lamp module that pairs a 270W NSH bulb with a pre-fitted housing. It arrives ready for immediate installation in compatible Canon projectors, removing the need to handle a bare burner or align a separate cage. The unit is supplied new and built to ISO 9001 quality standards.

Projector owners needing a direct swap

This module suits owners of Canon projectors that specify the RS-LP12 part number and who want a drop-in replacement without extra assembly steps. It is not intended for users whose projector requires a different lamp code or a higher or lower wattage bulb. Buyers looking for a bare bulb without the housing should select a different product.

270W NSH bulb rated 2,000 hours

The lamp delivers 270 watts of power from an NSH discharge source and is rated for 2,000 hours of typical operation. Matching both the wattage and the rated life to the projector's original specification is the single factor that confirms this is the correct part.

Highlights

  • Ready-to-install lamp module simplifies projector maintenance
  • Genuine NSH 270W bulb delivers correct brightness for Canon projectors
  • Rated 2,000 hours lamp life supports extended use between replacements
  • Manufactured to ISO 9001 quality standards for reliable performance
  • Includes housing and bulb pre-assembled for immediate installation

Specifications

BrandCanon
TypeNSH
Wattage270W
Lamp Life2,000 hrs

Questions about this item

How do I install the RS-LP12 lamp module and which step is often missed?

Power off the projector and let it cool completely, remove the lamp cover, release the retaining screws, slide the old module out, insert the new RS-LP12 housing until it seats firmly, re-tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the counter reset is the step most people forget.

What maintenance or replacement will the RS-LP12 need after extended use?

The NSH 270 W bulb is rated for about 2 000 hours; once brightness drops noticeably or the projector signals end-of-life, replace the entire RS-LP12 module — no separate bulb swap or filter service is required for this lamp unit.

What limit appears first when the RS-LP12 runs continuously for long sessions?

The 270 W NSH bulb reaches its rated 2 000-hour lifespan before any other component; thermal protection may also dim the image if ventilation is restricted, so keep intake and exhaust vents clear during sustained operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.