Canon
Canon LVLP12 150W Projector Lamp 2000 Hrs
A Canon LVLP12 150W UHP projector lamp rated for 2000 hours, supplied as a complete housing for direct installation
- TypeProjector Lamp
- Wattage150W
- Lamp Life2,000 Hrs.
- Genuine Canon replacement lamp fits directly
- 150 W UHP bulb powers bright projection
- 2 000 hour rated life extends service interval
- ISO 9001 manufacturing ensures consistent quality
- Fully assembled housing enables quick installation
Canon LVLP12 Replacement Lamp
The Canon LVLP12 is a new replacement lamp module supplied with a 150W UHP bulb pre-fitted in its housing. It is intended for owners of compatible Canon projectors who need to restore brightness after the original lamp reaches its rated end of life.
Practical Limits of the 150W UHP Lamp
The lamp is rated for 2,000 hours of operation before brightness drops to half its initial output. Actual runtime varies with projector usage patterns, ambient temperature and the number of power cycles. There is no user-serviceable component inside the sealed housing.
Installation and Common Issues
The assembled module slides into the projector lamp compartment and locks with the captive screw; no tools or alignment steps are required beyond following the projector manual. Failures usually stem from skipping the lamp-hour reset in the menu, blocking the projector air filters or handling the bulb glass with bare fingers.
Highlights
- Genuine Canon replacement lamp fits directly
- 150 W UHP bulb powers bright projection
- 2 000 hour rated life extends service interval
- ISO 9001 manufacturing ensures consistent quality
- Fully assembled housing enables quick installation
Specifications
| Brand | Canon |
|---|---|
| Type | Projector Lamp |
| Wattage | 150W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
Should I choose the original OEM lamp, the Canon-sold OEM, the alternative OEM or the compatible version?
The original OEM comes from the same bulb maker as the factory lamp, the Canon-sold OEM is identical but branded by Canon, the alternative OEM uses a different top-tier bulb manufacturer, and the compatible version uses genuine OEM parts at a lower cost.
What does the 150W rating mean for brightness and heat in my projector?
The 150W UHP bulb delivers the lumen output the projector was designed for, so image brightness matches the original specification and the cooling system handles the heat load exactly as it did with the factory lamp.
Does the LVLP12 use a standard lamp connector or a proprietary interface?
The module is built as a direct plug-in replacement for the Canon LVLP12 housing, so the connector and mounting points match the projector's original lamp socket without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



