Canon
Canon LV 7296 POA-LMP132 Projector Lamp 220W
Genuine compatible 220W replacement lamp module with 2,000 to 3,000 hour life for Canon projectors
- TypeProjector Lamp
- Wattage220W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Genuine 220W UHP bulb delivers bright projection
- 2,000 normal hours extends replacement intervals
- 3,000 economy hours lowers running cost
- Pre-assembled housing enables quick installation
- ISO 9001 quality checks ensure reliable operation
Genuine Replacement Lamp 7296
The Canon LV 7296 POA-LMP132 is a new 220W projector lamp module supplied with a fully assembled bulb and housing. It is designed for owners of compatible Canon projectors who need a direct replacement when the original lamp reaches the end of its rated life.
Restores Original Brightness
This module replaces a depleted lamp to bring the projector back to its factory light output. The jump is worth it when the current lamp has dimmed significantly or the projector warns that the 2,000-hour normal or 3,000-hour economy rating has been exceeded.
Simple Module Swap
The pre-assembled bulb and housing allow a straightforward installation without handling a bare lamp. The main risk is forgetting to reset the projector’s internal hour counter after fitting the new module, which can leave the replacement warning active.
Highlights
- Genuine 220W UHP bulb delivers bright projection
- 2,000 normal hours extends replacement intervals
- 3,000 economy hours lowers running cost
- Pre-assembled housing enables quick installation
- ISO 9001 quality checks ensure reliable operation
Specifications
| Brand | Canon |
|---|---|
| Type | Projector Lamp |
| Wattage | 220W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Does the LV 7296 lamp module include the housing so it fits straight into the projector?
Yes, the module is supplied as a fully assembled 220 W bulb inside its housing, ready to slot into the compatible Canon projector without extra parts.
What is the correct way to install the POA-LMP132 lamp and what step do people often miss?
Power off and unplug the projector, let it cool, remove the old lamp cover, slide the new module in until it clicks, replace the cover, then reset the lamp timer in the menu — skipping the timer reset is the common error.
When will the 220 W UHP bulb need replacing and how do the two modes affect that?
In Normal mode expect about 2 000 hours of use; switching to Economy mode extends life to roughly 3 000 hours before a replacement module is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



