We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Canon 20 lb bond paper roll, 30 in wide, matte coated finish

Canon

Canon 20 lb Bond Paper 30 in x 300 ft Roll

SKU CH-H584-NHP06

A 30-inch by 300-foot roll of 20 lb coated bond paper with a matte finish, double-sided printing, and acid-free construction for CAD, GIS, and presentation mapping

  • Coated surface gives crisp lines and good ink acceptance
  • 20 lb basis weight (75 gsm) suits large-format presentation and CAD work
  • Double-sided printing adds versatility for maps and engineering drawings
  • Acid-free stock with 120% whiteness and 89% opacity preserves documents
  • 30 in by 300 ft roll on 3 in core fits wide-format printers

30-inch wide roll for CAD and mapping

This 30-inch by 300-foot roll of Canon 20 lb Bond Paper suits large-format presentation mapping, microfilming and general CAD or GIS engineering work. The coated base provides a smooth surface for crisp lines and good ink acceptance. It is acid free with a whiteness rating of 120% and opacity of 89%. The matte finish has a gloss level below 5% at 60.

Easy roll loading on 3-inch core

The roll fits standard large-format printers that accept a 3-inch core. Its 4 mil thickness feeds reliably through most roll-feed mechanisms without curling. Double-sided printing is supported, so both faces can be used for drafts or final output. Ensure the printer’s maximum roll diameter accommodates the 300-foot length.

Check printer width and media settings

Verify that your printer supports a 30-inch media width before ordering. Confirm the driver or front-panel media type includes a 20 lb or 75 gsm bond setting for correct heat and feed calibration. The low-gloss matte surface requires a plain-paper or coated-bond profile rather than a photo-gloss setting. Acid-free stock is safe for archival storage.

Highlights

  • Coated surface gives crisp lines and good ink acceptance
  • 20 lb basis weight (75 gsm) suits large-format presentation and CAD work
  • Double-sided printing adds versatility for maps and engineering drawings
  • Acid-free stock with 120% whiteness and 89% opacity preserves documents
  • 30 in by 300 ft roll on 3 in core fits wide-format printers

Specifications

BrandCanon USA

Questions about this item

How can I confirm the paper is feeding and printing correctly after loading the roll?

Load the 30-inch roll onto the 3-inch core, print a test page, and verify crisp lines, even ink acceptance on both sides, and a matte finish with minimal gloss.

What comes with the roll and what must I supply separately?

The box contains the 300-foot roll of 20 lb bond paper on a 3-inch core; you must provide a compatible large-format printer and ink.

Which roll width and length should I choose for CAD and GIS plotting?

This single 30-inch by 300-foot roll suits wide-format engineering plots; select it when your printer accepts 30-inch media and you need long, continuous output.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.