Canare
Canare L-3CFW RG59 HD-SDI Coaxial RF Cable 50ft Male BNC Black
50 ft RG59 coaxial cable with male BNC connectors supports 3.0 Gb/s HD-SDI and SMPTE 259M/292M/424M standards
- Supports SMPTE 259M, 292M and 424M-B for professional video
- 0 Gb/s data rate handles 3G-SDI and HD-SDI signals
- Male BNC connectors provide secure, reliable connections
- 50-foot length suits studio and on-location setups
- Advanced shielding minimises interference for clean transmission
Professional HD-SDI interconnect
Canare L-3CFW RG59 coaxial cable delivers broadcast-grade serial digital video up to 3.0 Gb/s over 50 ft. Male BNC connectors on both ends provide secure locking for studio cameras, switchers and recorders. The assembly meets SMPTE 259M, 292M and 424M-B specifications for SD, HD and 3G-SDI workflows. Black jacket suits permanent rack installs or mobile production kits.
Upgrade from generic RG59 patch leads
Standard consumer coax often lacks the controlled impedance and shielding density required for error-free 3G-SDI transport. This cable replaces thinner runs that exhibit bit errors or clock jitter on long SDI paths. The jump is worth it when signal integrity must survive multiple patch-panel hops or outdoor OB van routing. It does not suit installations needing fibre distance or multi-channel MADI over coax.
Sustained load behaviour
Dense braid plus foil shielding maintains consistent return loss and attenuation across the full 50 ft during continuous 3 Gb/s carriage. Conductor geometry stays stable under repeated flexing in live-event deployments. Connectors retain mating force after hundreds of insertions, preventing intermittent contact during extended recording sessions. No active equalisation is required at the receiver for this length at 3G rates.
Highlights
- Supports SMPTE 259M, 292M and 424M-B for professional video
- 0 Gb/s data rate handles 3G-SDI and HD-SDI signals
- Male BNC connectors provide secure, reliable connections
- 50-foot length suits studio and on-location setups
- Advanced shielding minimises interference for clean transmission
Specifications
No published specifications for this item yet.
Questions about this item
What connector type does the 50ft Canare L-3CFW cable use for HD-SDI equipment?
The cable is terminated with Male BNC connectors on both ends, designed for professional HD-SDI and 3G-SDI video gear.
How do I correctly seat the BNC connectors to avoid signal loss on this RG59 cable?
Align the connector pins, push straight in, then twist the locking ring a quarter-turn clockwise until it clicks; do not over-tighten.
When should I replace this Canare L-3CFW RG59 cable in a permanent studio installation?
Inspect annually for jacket cracks, kinks, or loose BNC shells; replace if attenuation rises or SMPTE 424M error rates increase.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



