We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

CAMWAY 5PCS 2in1 1-8s Lipo Battery Voltage Tester

SKU CH-CP9W-YJMF3

Five testers monitor 1-8S LiPo, Li-ion, LiMn and LiFe packs, showing cell, total and lowest voltages plus remaining capacity with 0.01 V precision.

  • FeaturesBattery Powered, false
  • Height4 L x 2.5 W x 1.1 H centimeters
  • Width4 L x 2.5 W x 1.1 H centimeters
  • Length4 L x 2.5 W x 1.1 H centimeters
  • Weight45 grams
  • TypeVoltmeter
  • Checks individual cell, total, lowest voltage and remaining capacity via clear LED display
  • Protects lithium packs from over-charge and over-discharge during use
  • Audible buzzer and red LED alert when any cell drops below the set threshold
  • Adjustable alarm trigger from OFF through 2.7 V to 3.8 V with top-mounted button
  • Compact 45 g unit handles 1–8S LiPo, Li-ion, LiMn and Li-Fe chemistries

Five-piece 1-8S LiPo voltage checker

This pack supplies five identical 2-in-1 testers that measure individual cell voltage, total pack voltage, lowest cell voltage and remaining capacity for 1 to 8-series lithium-polymer, lithium-ion, lithium-manganese and lithium-iron packs. Each unit fits in a pocket at 4 by 2.5 by 1.1 centimetres and weighs 45 grams. Hobby pilots and builders who need a quick health read-out before every flight will find the quantity convenient for multiple models or field spares.

0.01-volt resolution with 0.5-to-36-volt total range

The display shows cell voltages from 0.5 to 4.5 volts and totals from 0.5 to 36 volts, while the 1S test mode covers 3.7 to 30 volts. A single top button steps the low-voltage alarm threshold between off, 2.7 and 3.8 volts, defaulting to 3.3 volts, and the setting is saved after power removal. Reverse-connection protection prevents damage if the balance lead is plugged in backwards.

Continuous buzzer and red LED alarm under load

When any cell drops below the chosen threshold the tester sounds a continuous buzzer and flashes a red LED, giving an unmistakable warning during sustained discharge rather than a momentary beep. The alarm remains active until the pack is disconnected or the voltage recovers above the set point. Users who require silent monitoring or a higher cell-count display will need a different instrument.

Highlights

  • Checks individual cell, total, lowest voltage and remaining capacity via clear LED display
  • Protects lithium packs from over-charge and over-discharge during use
  • Audible buzzer and red LED alert when any cell drops below the set threshold
  • Adjustable alarm trigger from OFF through 2.7 V to 3.8 V with top-mounted button
  • Compact 45 g unit handles 1–8S LiPo, Li-ion, LiMn and Li-Fe chemistries

Specifications

BrandCAMWAY
FeaturesBattery Powered, false
Height4 L x 2.5 W x 1.1 H centimeters
Width4 L x 2.5 W x 1.1 H centimeters
Length4 L x 2.5 W x 1.1 H centimeters
Weight45 grams
TypeVoltmeter

Questions about this item

What does the 0.01 V precision mean when I plug this tester into a 6S pack?

It shows each cell voltage to two decimal places so you can spot a drifting cell before it drops below the 3.3 V default alarm threshold.

The alarm works from 2S to 8S — what does that limit in practice?

You can set the buzzer trigger anywhere from 2.7 V to 3.8 V per cell, but the monitor will not sound an alarm on a single-cell pack.

The unit measures 4 × 2.5 × 1.1 cm — what mounting clearance does that need?

Allow roughly that footprint plus room for the balance lead; the tester weighs 45 g and has no built-in mounts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.