We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium articulated arm with dual 1/4"-20 ball heads, 4.8 inch reach

Camvate

Camvate Flexible Articulating Arm 1/4"-20 Double Ball Head 4.8" camcorder accessory

SKU CH-A1FF-5HM0V

Flexible articulating arm with 1/4"-20 double ball heads extends to 4.8" (122mm) for positioning monitors, lights or audio gear on camera cages

  • Steady shots with secure double ball head mount
  • Durable aluminium alloy construction withstands rigorous professional use
  • Wide compatibility via 1/4"-20 screw adapters on both ends
  • Precise positioning up to 4.8" (122 mm) maximum extension
  • Tool-less locking and anti-off clamp keep accessories secure

Versatile Camera Rig Arm

The Camvate Flexible Articulating Arm attaches monitors, lights, or audio recorders to a camera cage using standard 1/4"-20 threads on both ends. A double ball head design lets you set the angle by hand and lock it without tools. An anti-off clamp keeps the ball heads from slipping once tightened.

4.8 Inch Reach Constraint

Maximum extension is 4.8 inches (122 mm), so the arm only bridges short gaps between cage and accessory. The aluminium alloy construction resists flex under light loads, but heavier monitors may sag at full stretch. Both ball heads share a single locking lever, limiting independent tension control for each joint.

Replaces Fixed Cold Shoe Mounts

This arm upgrades from static shoe adapters that offer no angle adjustment. The jump is worth it when you need to tilt a screen for high or low angles, or shift a light off-centre without remounting. It does not suit rigs requiring longer reach or independent pan and tilt locks.

Highlights

  • Steady shots with secure double ball head mount
  • Durable aluminium alloy construction withstands rigorous professional use
  • Wide compatibility via 1/4"-20 screw adapters on both ends
  • Precise positioning up to 4.8" (122 mm) maximum extension
  • Tool-less locking and anti-off clamp keep accessories secure

Specifications

No published specifications for this item yet.

Questions about this item

How do I choose between the two 1/4"-20 ball heads on this arm?

Both ends use identical 1/4"-20 threads, so you can attach a camera cage on one side and a monitor, light or audio recorder on the other without needing different adapters.

What does the 4.8" maximum extension mean when the arm is mounted on a rig?

At full stretch the arm reaches 122 mm from centre to centre, giving enough clearance to position a monitor or light just outside the cage while keeping the load centred over the mount.

What does the 1/4"-20 thread standard cap in practice?

The 1/4"-20 threads accept any accessory with a matching screw hole — cages, NATO rails, cold-shoe adapters or quick-release plates — so the arm works with virtually all current photo and video gear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.