We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminium 15mm rod clamp with 1/4"-20 adapter and lever

Camvate

Camvate 15mm Single Rod Clamp 1/4"-20 Adapter Black Lever

SKU CH-CNBQ-TCBEP

Aluminium 15 mm rod clamp with 1/4"-20 screw adapter and lever, weighing 55 g

  • High-grade aluminium construction withstands rigorous professional use
  • Four 1/4"-20 threaded holes plus mounting screw fit diverse rigs
  • Black lever enables quick, secure positioning on 15mm rods
  • Weighs only 55 g to keep rigs light during long shoots
  • 1/4"-20 adapter on top mounts monitors or microphones directly

Rod Clamp for 15mm Systems

The Camvate single rod clamp attaches a 15mm rod to a camera cage or rig using a 1/4"-20 screw adapter on top. It is built for videographers and photographers who need a lightweight mounting point for monitors, microphones or other accessories on a standard rod system.

Installation and Common Issues

The black lever provides tool-free tightening on the rod, while the four 1/4"-20 threaded holes and included mounting screw let you secure accessories directly. Misalignment can occur if the lever is not fully engaged, so verify the rod sits flush before locking it down.

Limits of the 1/4"-20 Interface

The 1/4"-20 threads support typical light accessories such as small monitors or audio gear, but heavier loads may exceed the holding strength of the screw adapter. The clamp is designed for a single 15mm rod only and does not accommodate dual-rod or larger-diameter configurations.

Highlights

  • High-grade aluminium construction withstands rigorous professional use
  • Four 1/4"-20 threaded holes plus mounting screw fit diverse rigs
  • Black lever enables quick, secure positioning on 15mm rods
  • Weighs only 55 g to keep rigs light during long shoots
  • 1/4"-20 adapter on top mounts monitors or microphones directly

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the clamp is holding the 15mm rod firmly after I tighten the black lever?

Tighten the black lever until the rod cannot rotate or slide; the clamp should feel rigid with no play at the 1/4"-20 mounting points.

What comes in the box and do I need to buy a 15mm rod or 1/4"-20 screws separately?

The package contains the single rod clamp with its integrated 1/4"-20 mounting screw and four 1/4"-20 threaded holes; a 15mm rod and any additional 1/4"-20 screws are not included.

Which version should I choose if my rig uses a 15mm rod and I need a top 1/4"-20 adapter for a monitor?

This model is the 15mm single rod clamp with a built-in 1/4"-20 screw adapter on top, weighing 55g, and is the correct choice for that configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.