Camplex
Camplex SMS9-ST-ST-001 1 m 9/125 Singlemode Simplex ST to ST Fiber Optic Patch Cable Yellow
A 1 m singlemode simplex fibre patch cable with ST connectors at both ends for linking two fibre-optic ports
- Singlemode 9/125 µm core for long-distance links
- 1 metre length suits short rack-to-rack runs
- ST-to-ST connectors fit legacy patch panels
- Yellow OFNR jacket meets riser fire rating
- Factory tested for reliable insertion loss
Target Use
This singlemode simplex patch cable connects two devices equipped with ST fiber ports. The 9/125 micron core and cladding support long-distance data transmission in enterprise and campus networks. Yellow OFNR jacket identifies the singlemode rating at a glance. It suits installers and network engineers building or extending fiber links.
Build Integration
ST connectors on both ends plug directly into matching bulkhead adapters or transceiver modules without adapters. The 1 metre length keeps patch panels tidy while allowing slack for routing. Simplex construction carries one optical path, freeing a second port for a separate return link. OFNR rating permits in-building riser and general-purpose horizontal runs.
Thermal Noise Power
Passive fiber carries no electrical current, so the cable generates no heat and adds no acoustic noise to the rack. Insertion loss remains low under normal operating temperatures. Power draw is zero because no active components are present. The OFNR jacket maintains flexibility and mechanical protection across typical indoor temperature ranges.
Highlights
- Singlemode 9/125 µm core for long-distance links
- 1 metre length suits short rack-to-rack runs
- ST-to-ST connectors fit legacy patch panels
- Yellow OFNR jacket meets riser fire rating
- Factory tested for reliable insertion loss
Specifications
No published specifications for this item yet.
Questions about this item
What is the maximum length this singlemode patch cable can span before signal loss becomes a concern?
This patch cable is 1 metre long, and singlemode 9/125 fibre typically supports much longer runs than this length.
Does the yellow OFNR jacket handle heat differently if the cable runs through a warm plenum space all day?
The OFNR jacket is rated for riser use and resists flame spread, but it is not a plenum-rated OFNP jacket for high-heat air-handling spaces.
Which ports must my equipment already have to connect this cable directly?
Your devices need ST fibre ports, as this cable has ST connectors on both ends for a simplex singlemode link.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



