Campbell
Campbell T9401624 3/8" Clevis Slip Hook Grade 43 Zinc Plated conveying
Grade 43 carbon-steel slip hook with a 5,400 lb working load limit and clevis attachment for 3/8 in chain
- Grade 43 carbon steel handles 5,400 lb working load
- Clevis attachment fits 3/8 in Grade 43 chain securely
- Zinc plated finish resists corrosion in tough conditions
- 5/8 in clevis width with 1/2 in pin diameter
- 1 5/16 in hook opening accepts thick links
Hook Specification
The Campbell T9401624 is a 3/8 inch clevis slip hook rated to Grade 43 with a zinc-plated finish. It is intended for pulling and conveying tasks where a secure clevis attachment to compatible chain is required. The hook accepts a 1/2 inch clevis pin and fits a 5/8 inch clevis inside width for direct chain connection.
Working Load Limit
This hook carries a working load limit of 5,400 lb and is marked as not for lifting applications. It comfortably handles in-line pulling loads within that limit when paired with Grade 43 chain of 3/8 inch trade size. The carbon steel body and zinc plating resist corrosion during outdoor or industrial conveying work.
Critical Restriction
The product is explicitly not rated for lifting, so it must not be used for overhead hoisting or rigging where a lifting-rated hook is required. Buyers who need a hook certified for lifting applications should select a different component. The clevis attachment also means it cannot be used with eye-type or threaded connections.
Highlights
- Grade 43 carbon steel handles 5,400 lb working load
- Clevis attachment fits 3/8 in Grade 43 chain securely
- Zinc plated finish resists corrosion in tough conditions
- 5/8 in clevis width with 1/2 in pin diameter
- 1 5/16 in hook opening accepts thick links
Specifications
| Brand | CAMPBELL CHAIN & FITTINGS |
|---|
Questions about this item
Will the 5/8 in clevis inside width accept the 3/8 in Grade 43 chain I already use?
Yes, the 5/8 in clevis inside width and 1/2 in clevis pin diameter are sized for 3/8 in Grade 43 chain, matching the compatible chain trade size listed for this hook.
How do I confirm the hook is rated for my 5,400 lb working load limit requirement?
Check the hook body for the Grade 43 marking and verify the 5,400 lb working load limit matches your application; the zinc-plated carbon steel construction is rated for that limit in pulling and conveying use.
Does the package include the clevis pin and cotter for installation?
The hook is supplied as a clevis slip hook with the clevis pin and cotter pin included, so no separate hardware is needed to attach it to 3/8 in Grade 43 chain.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
