We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Low-lead brass tee with two barbed ends and a male threaded branch

Campbell

Campbell HT4-3TLF Low Lead Brass Tee

SKU CH-BFCB-D1XPE

Low-lead brass tee connects two 1-inch barbs to a 3/4-inch male NPT thread, rated from -65 to 250 degrees F and NSF 61 compliant

  • TypeOther
  • Low-lead brass meets NSF 61 for safer water
  • Wide -65 °F to 250 °F range handles extreme temps
  • 1 in barbs on two ends accept large hose IDs
  • 3/4 in male NPT thread connects to standard pipe
  • Reusable brass construction allows multiple assemblies

1" Brass Tee for Hose & Pipe Connections

The Campbell HT4-3TLF is a low-lead brass tee designed to join two 1-inch barbed hose ends with a 3/4-inch male NPT thread. It suits plumbing and fluid-transfer installations where a secure, reusable branch connection is required. The fitting operates reliably across a -65 °F to 250 °F temperature range.

Suited for Barbed Hose and NPT Thread Systems

Installers needing a durable brass junction for 1-inch hose barbs combined with a 3/4-inch male pipe thread will find this tee appropriate. It is not intended for buyers who need push-to-connect, compression or flare ends, nor for those requiring a different barb or thread diameter.

NSF 61 Certified Brass Material

The body is manufactured from low-lead brass that meets NSF 61 standards for drinking-water contact. This certification is the decisive factor for projects that must comply with potable-water regulations.

Highlights

  • Low-lead brass meets NSF 61 for safer water
  • Wide -65 °F to 250 °F range handles extreme temps
  • 1 in barbs on two ends accept large hose IDs
  • 3/4 in male NPT thread connects to standard pipe
  • Reusable brass construction allows multiple assemblies

Specifications

BrandCAMPBELL
TypeOther

Questions about this item

What comes in the box and do I need to buy clamps or sealant separately?

The box contains the low-lead brass tee with 1 in barbs on two ends and a 3/4 in male NPT thread on the third; hose clamps and thread sealant are not included and must be purchased separately.

How do I choose between the barbed ends and the threaded end for my plumbing layout?

Use the two 1 in barbs for push-on hose connections secured with clamps, and use the 3/4 in male NPT thread to screw directly into a matching female NPT port or adapter.

What does the 250 °F temperature rating mean when the fitting is installed in a hot-water line?

The brass body and NSF 61 listing allow continuous service up to 250 °F, so the tee will not degrade in standard residential hot-water systems that typically run well below that limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.