We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver air ratchet with black soft grip and 3/8 inch square drive

CAMPBELL HAUSFELD

CAMPBELL HAUSFELD TL050101AV 3/8 in. Air Ratchet

SKU CH-3V4Q-AX88T

A 3/8 in. drive air ratchet delivering 50 ft-lbs. of torque at 150 RPM for automotive maintenance tasks

  • TypeOthers
  • Delivers 50 ft-lbs torque for tough fastening jobs
  • 150 RPM operating speed completes tasks quickly
  • Lightweight 2.5 lbs design reduces user fatigue
  • Compact build with soft grip reaches confined spaces
  • 2 SCFM average air consumption suits standard compressors

Automotive air ratchet for confined spaces

The Campbell Hausfeld TL050101AV is a 3/8 in. drive air ratchet built for automotive maintenance such as oil changes, tune-ups and radiator work. It delivers 50 ft-lbs. of maximum torque at 150 RPM so you can complete fastening tasks quickly. The lightweight 2.5 lb. body and soft grip reduce fatigue during extended use. Its compact design reaches areas where hand tools are too bulky.

Verify air supply and hose before ordering

Your compressor must supply 90 PSI operating pressure and sustain 19.2 SCFM continuous air consumption. The tool requires a minimum 3/8 in. I.D. hose and a 1/4 in. NPT inlet fitting, which is included. Average air consumption is 6.2 SCFM. Confirm your existing fittings and hose length can meet these flow demands without excessive pressure drop.

Fits tight engine bays and frees hand-tool effort

The square-drive ratchet head accesses confined spots around engine components where a wrench cannot swing. It needs a compatible air compressor and hose rated for the required SCFM at 90 PSI. The included 1/4 in. NPT plug connects directly to the tool inlet. By replacing manual ratcheting, it speeds up repetitive fastener work on maintenance jobs.

Highlights

  • Delivers 50 ft-lbs torque for tough fastening jobs
  • 150 RPM operating speed completes tasks quickly
  • Lightweight 2.5 lbs design reduces user fatigue
  • Compact build with soft grip reaches confined spaces
  • 2 SCFM average air consumption suits standard compressors

Specifications

BrandCampbell-Hausfeld
TypeOthers

Questions about this item

Does the TL050101AV come with everything needed to connect to an air line?

The box contains the 3/8 in. air ratchet and a 1/4 in. 10 NPT inlet plug. You must supply a minimum 3/8 in. I.D. hose and a compressor able to deliver 6.2 SCFM average at 90 PSI.

How do I know if the 50 ft-lbs torque rating suits my jobs?

Fifty foot-pounds of maximum torque handles common automotive fasteners such as oil-drain plugs, spark-plug sockets and radiator-hose clamps without the bulk of a hand ratchet.

What does the 150 RPM figure mean when I am under the bonnet?

At 90 PSI the ratchet spins at 150 RPM, so bolts run down quickly in tight engine bays where a hand tool would need multiple swings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.