CAMPBELL HAUSFELD
CAMPBELL HAUSFELD PA1177 Air Hose 3/8" 25' 200 PSI
Reinforced PVC air hose, 25 ft long with 3/8 in. bore and 200 PSI rating, includes brass 1/4 in. NPT fittings
- Type3/8"X25' AIR HOSE
- Reinforced PVC construction resists oil and abrasion
- 25-foot length gives extended reach for air tools
- 3/8-inch inside diameter supports high airflow
- Brass fittings with 1/4-inch NPT threads ensure secure connections
- 200 PSI working pressure handles demanding pneumatic tasks
Campbell Hausfeld PA1177 Air Hose 3/8" 25'
This 3/8-inch internal diameter air hose extends 25 feet to connect pneumatic tools to a compressor. Reinforced PVC construction resists oil and abrasion for workshop durability. Brass fittings with 1/4-inch NPT male threads attach directly to standard couplers. The assembly is rated for 200 PSI working pressure.
Practical Limits of 200 PSI Working Pressure
The hose handles up to 200 PSI, so the compressor regulator must stay at or below this value. Exceeding the rating risks hose failure or fitting separation. Reinforced PVC remains flexible in typical shop temperatures but can stiffen in extreme cold. Oil resistance protects the inner liner from compressor carry-over.
Check Compressor Output and Fitting Compatibility
Verify the compressor delivers pressure within the 200 PSI limit before connecting. Ensure tool inlets accept 1/4-inch NPT male threads or have suitable adapters. Confirm the 25-foot length reaches the work area without excessive slack. Inspect existing quick-connect couplers for thread match and pressure rating.
Highlights
- Reinforced PVC construction resists oil and abrasion
- 25-foot length gives extended reach for air tools
- 3/8-inch inside diameter supports high airflow
- Brass fittings with 1/4-inch NPT threads ensure secure connections
- 200 PSI working pressure handles demanding pneumatic tasks
Specifications
| Brand | Campbell-Hausfeld |
|---|---|
| Type | 3/8"X25' AIR HOSE |
Questions about this item
What length of this Campbell Hausfeld air hose should I pick for a small garage?
The hose comes in a single 25-foot length, which suits most compact workspaces and keeps the reel tidy.
How does the 200 PSI rating affect everyday air-tool use?
At 200 PSI working pressure the hose handles nail guns, impact wrenches and spray guns without bursting or losing flow.
Will the 1/4" NPT brass fittings thread straight onto my compressor and tools?
Yes, each end has a 1/4" MNPT brass fitting that matches standard compressor outlets and most pneumatic tool inlets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
