We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green powder-coated alloy steel self-locking hook with clevis attachment

Campbell

Campbell 5748695 3/8" Quik-Alloy Self Locking Hook Grade 100 Green

SKU CH-Q3JA-76SK6

Self-locking alloy-steel hook rated Grade 100 with an 8,800 lb working load limit and powder-coated green finish

  • TypeHook & Loop
  • Self-locking clevis hook secures loads without manual latching
  • Grade 100 alloy steel delivers 8,800 lb working load limit
  • Powder-coated green finish resists corrosion in outdoor use
  • Meets ASME B 30.9 and ASTM A952 lifting standards
  • Compatible with Grade 80 or 100 chain for versatile rigging

Campbell Grade 100 Self-Locking Hook

The Campbell 5748695 is a Grade 100 alloy-steel self-locking hook designed for overhead lifting and rigging with Grade 80 or 100 chain. Its clevis attachment and powder-coated green finish suit industrial and construction crews who need a secure, quick-connect point that meets ASME B 30.9, ASTM A952 and B 30.10.

Replaces standard sling hooks without positive

This hook upgrades from conventional sling hooks that rely on gravity or a latch to stay closed. The self-locking mechanism engages automatically under load, so the jump is worth it whenever a dropped load would create a safety hazard or when regulations require a positive-lock device for personnel lifts.

Limited to Grade 80 or 100 chain and listed

The clevis pin diameter and inside width accept only compatible Grade 80 or 100 chain, and the working load limit of 8,800 lb must not be exceeded. It is not suited for applications that demand a higher grade, a different attachment style or a working load beyond the rated value.

Highlights

  • Self-locking clevis hook secures loads without manual latching
  • Grade 100 alloy steel delivers 8,800 lb working load limit
  • Powder-coated green finish resists corrosion in outdoor use
  • Meets ASME B 30.9 and ASTM A952 lifting standards
  • Compatible with Grade 80 or 100 chain for versatile rigging

Specifications

BrandCAMPBELL
TypeHook & Loop

Questions about this item

What size chain does the 3/8 in clevis on this hook accept?

The clevis pin diameter is 1/2 in and the inside width is 7/16 in, designed for use with Grade 80 or 100 chain of the matching trade size.

How is the clevis pin secured during installation?

Insert the pin through the chain link and clevis ears, then fasten the supplied retaining pin or cotter; the step often missed is fully seating the retainer so the pin cannot back out under load.

When should this Grade 100 hook be removed from service?

Inspect before each use; retire the hook if the throat opening exceeds 1 7/8 in, if cracks, nicks or wear exceed 10 % of the original material, or if the powder-coated finish shows corrosion exposing the alloy steel underneath.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.