We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel chain coil, 5/16 inch links, 60 foot length

Campbell

Campbell 5/16" Grade 43 High Test Chain Galvanized 60 ft

SKU CH-F1X4-VQN3N

Grade 43 high-test carbon-steel chain with a 3,900 lb working load limit, galvanized finish and 60 ft length for marine mooring

  • Grade 43 strength handles 3,900 lb working load limit
  • Galvanized carbon steel resists corrosion in marine environments
  • 60 ft continuous length suits dock and mooring layouts
  • 5/16 in trade size fits standard 5/16 in fittings
  • Welded straight links deliver consistent 0.95 lb per foot weight

Campbell 5/16" Grade 43 Chain

This Campbell chain is a 60-foot length of Grade 43 high-test chain with a galvanized finish. It is built from carbon steel using welded straight links for marine dock equipment and general utility purposes. The working load limit is 3,900 lb and the trade size is 5/16 inch.

Suited for dock lines and tie-downs

The chain suits boat owners securing vessels at a dock and users needing corrosion-resistant chain for outdoor tie-down jobs. It is not rated for overhead lifting, so buyers who need lifting slings or hoist chain should look elsewhere. The product includes no hooks or end fittings of any kind.

Grade 43 working load limit 3,900 lb

The single specification that decides fit is the Grade 43 rating with a 3,900 lb working load limit. This figure determines whether the chain can handle the intended tension load safely. Verify that this limit meets the requirement before installing the chain.

Highlights

  • Grade 43 strength handles 3,900 lb working load limit
  • Galvanized carbon steel resists corrosion in marine environments
  • 60 ft continuous length suits dock and mooring layouts
  • 5/16 in trade size fits standard 5/16 in fittings
  • Welded straight links deliver consistent 0.95 lb per foot weight

Specifications

BrandCAMPBELL

Questions about this item

Does this 5/16 in Grade 43 chain require a specific windlass gypsy to operate on my boat?

The chain has a trade size of 5/16 in, an inside link length of 1 1/4 in, and an inside width of 1/2 in with 9 links per foot; match these dimensions to your windlass gypsy specifications for proper engagement.

Will the galvanized finish on this chain react with older stainless steel shackles already on my dock lines?

The chain features a galvanized carbon steel finish; direct contact with stainless steel fittings in a marine environment can create a galvanic cell, so inspect connections regularly for accelerated corrosion on the chain links.

How can I verify the 3 900 lb working load limit is still valid after installing the 60 ft length?

Check each welded link for deformation, gouges, or excessive wear; measure the material thickness at several points — it should remain near 21/64 in — and confirm the galvanized coating is intact without heavy flaking or rust pitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.