We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Campbell 4030E 3/4 inch FNPT brass spring check valve

Campbell

Campbell 4030E 3/4" FNPT Brass Spring Check Valve

SKU CH-7GW0-N6QZQ

A 3/4" FNPT brass spring check valve with .5 psi cracking pressure, 13 gpm flow and 400 psi water rating

  • TypeOther
  • Lead-free brass meets potable-water standards
  • 5 psi cracking pressure opens with minimal flow
  • 13 gpm capacity handles high-demand fixtures
  • 400 psi rating suits high-pressure systems
  • Spring-loaded design works horizontally or vertically

Campbell 4030E Brass Check Valve

The Campbell 4030E is a 3/4 inch FNPT lead-free brass spring check valve built for potable water lines. It suits residential and light commercial plumbing where backflow prevention is required.

Thermals noise and power

The valve operates passively with no electrical draw and no moving parts that generate noise. It handles water temperatures from 35 to 180 degrees Fahrenheit and withstands pressures up to 400 psi in the horizontal or vertical orientation.

Upgrade path and fit

This valve replaces a worn swing check or a missing backflow device on a 3/4 inch threaded line where a low cracking pressure of .5 psi and a flow capacity of 13 gpm are needed. It is not for steam service or for systems that exceed the rated temperature and pressure limits.

Highlights

  • Lead-free brass meets potable-water standards
  • 5 psi cracking pressure opens with minimal flow
  • 13 gpm capacity handles high-demand fixtures
  • 400 psi rating suits high-pressure systems
  • Spring-loaded design works horizontally or vertically

Specifications

BrandCAMPBELL
TypeOther

Questions about this item

How do I install the 4030E spring check valve and which orientation step is often missed?

Thread the 3/4" FNPT ends into the pipework using thread sealant, then ensure the valve body is mounted either horizontally or vertically with the flow arrow pointing downstream — the orientation must match the piping layout.

What maintenance or replacement will the 4030E need over time?

Inspect the nitrile seal and stainless-steel spring annually; replace the valve if the seat shows wear or if the cracking pressure drifts from the factory .5 psi setting.

Which limit appears first during sustained high-temperature water use?

The 180 °F maximum temperature rating is reached before the 400 psi pressure limit under continuous hot-water flow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.