We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular Ni-MH camera battery with label, 88 by 71 by 35 millimetres

CameronSino

CameronSino DS-CS-BZT3MD 9.6V 2000mAh Ni-MH camera battery

SKU CH-ZR2E-J9FVX

Replacement Ni-MH battery delivering 9.6 V and 2000 mAh for Bullard and Heiman thermal cameras

  • TypeBattery
  • 6 V Ni-MH chemistry powers compatible thermal cameras
  • 2000 mAh capacity delivers 19.2 Wh of runtime
  • Fits Bullard T3, T3 Max, T4 and T4 Max models
  • Replaces OEM part numbers ACAM0022, BZT3MAX, T3NI00688, T3NIMH
  • Certified to ISO 9001, RoHS and CE standards

Replacement Battery for Bullard Thermal Cameras

The CameronSino DS-CS-BZT3MD is a 9.6V 2000mAh Ni-MH pack built to replace the original Bullard ACAM0022 and BZT3MAX cells. It fits the Heiman T3 series including T3 Max, T3LT, T3XT, T4 and T4MAX models. The black housing measures 88.00 x 71.00 x 35.00 mm and carries ISO9001, RoHS and CE certification.

Low Self-Discharge Chemistry for Standby Readiness

Ni-MH cells exhibit minimal self-discharge so the battery holds charge during long storage periods typical for fire-service equipment. Normal operation draws modest current, keeping cell temperature close to ambient and eliminating audible noise from cooling. The 19.2 Wh capacity supports standard shift lengths without generating excess heat.

Steady Output During Extended Incidents

Under continuous thermal-imaging load the pack maintains a stable 9.6V rail without the voltage sag seen in high-rate chemistries. Internal resistance remains low through the discharge curve, so the camera’s display and sensor receive consistent power for the full 2000mAh rating. The rugged casing protects cells from vibration and impact during prolonged interior attacks.

Highlights

  • 6 V Ni-MH chemistry powers compatible thermal cameras
  • 2000 mAh capacity delivers 19.2 Wh of runtime
  • Fits Bullard T3, T3 Max, T4 and T4 Max models
  • Replaces OEM part numbers ACAM0022, BZT3MAX, T3NI00688, T3NIMH
  • Certified to ISO 9001, RoHS and CE standards

Specifications

BrandCameron Sino
ModelDS-CS-BZT3MD
TypeBattery

Questions about this item

How do I install the DS-CS-BZT3MD battery in my Bullard T3 camera?

Slide the pack into the camera’s battery compartment until the latch clicks; the step users miss is charging it fully before the first use.

What maintenance will the DS-CS-BZT3MD Ni-MH battery need over time?

Expect to replace the pack after several hundred charge cycles when run-time drops noticeably; store it at about half charge if unused for weeks.

What limit appears first during sustained thermal imaging with this 9.6V 2000mAh pack?

The 19.2 Wh capacity sets the runtime ceiling; continuous high-power thermal recording will drain the pack before thermal limits are reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.