We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion camera battery, dark grey finish, 36.95 x 30.10 x 12.35 mm

CameronSino

CameronSino DS-CS-BCD10 1000mAh camera battery

SKU CH-XX0V-69708

1000 mAh 3.7 V lithium-ion replacement battery for Panasonic Lumix TZ-series cameras

  • TypeBattery
  • 1000 mAh capacity keeps your Lumix shooting longer
  • 7 V Li-ion chemistry matches the original CGA-S007 spec
  • Fits DMC-TZ1 through TZ5 and TZ50 models
  • Slim 36.95 × 30.10 × 12.35 mm profile slips into the battery bay
  • Brand-new CameronSino cell delivers 100 % OEM compatibility

Compatible Lumix models

This 3.7 V 1000 mAh lithium-ion cell replaces the Panasonic CGA-S007 and DMW-BCD10 packs. It fits the DMC-TZ1 through DMC-TZ5 series including the TZ11, TZ15 and TZ50 variants. Photographers carrying a spare for travel or daily shooting will find it a direct drop-in replacement.

Thermals and power

The battery delivers its rated capacity at the nominal 3.7 V without additional cooling requirements. Normal camera operation sees minimal heat build-up and no audible noise from the cell itself. Power draw follows the camera’s own consumption profile.

Capacity

Rated at 1000 mAh, this pack determines how many shots or minutes of video you capture per charge. Buyers needing longer runtime per battery should look for higher-capacity alternatives.

Highlights

  • 1000 mAh capacity keeps your Lumix shooting longer
  • 7 V Li-ion chemistry matches the original CGA-S007 spec
  • Fits DMC-TZ1 through TZ5 and TZ50 models
  • Slim 36.95 × 30.10 × 12.35 mm profile slips into the battery bay
  • Brand-new CameronSino cell delivers 100 % OEM compatibility

Specifications

BrandCameron Sino
ModelDS-CS-BCD10
TypeBattery

Questions about this item

How do I install the DS-CS-BCD10 battery in my Panasonic Lumix DMC-TZ3, and what step do people often miss?

Slide the battery into the compartment with the contacts facing the camera body until the latch clicks; the step many miss is fully engaging the locking latch so the pack cannot shift during use.

What maintenance or replacement will the 3.7V 1000mAh Li-ion pack need over time?

Expect gradual capacity loss after several hundred charge cycles; when run-time drops below your needs, replace the pack with another DS-CS-BCD10 or compatible CGA-S007 unit.

What limit appears first during sustained shooting with this 1000mAh cell?

The 1000mAh capacity sets the total shot count per charge; continuous use drains the pack until the camera shuts down, so carry a spare for long sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.