Cameron Sino XFBT200 2500mAh 10.8V Li-ion dry cell battery
Replacement lithium-ion battery for Shark Ion W1 Cord and WV series vacuums, 2500 mAh at 10.8 V
- Specifications143.12 x 45.50 x 38.40
- Typelithium_ion
- Battery Pack143.12 x 45.50 x 38.40
- Battery Typelithium_ion
- Battery Capacity2500.00 milliamp_hours
- Battery Voltage10.80 volts
- Replacement for Shark Ion W1 Cord and WV series vacuums
- 2500 mAh capacity delivers 27.00 Wh of runtime
- 8 V lithium-ion chemistry matches original specification
- Compact 143.12 x 45.50 x 38.40 mm form factor fits battery bay
- Built-in protection against overcharge, over-discharge and short circuit
Cameron Sino XFBT200 2500mAh 10.8V Li-ion battery
This replacement battery fits Shark Ion W1 Cord, WV200, WV200UK, WV201, WV205 and WV220 vacuum cleaners. It delivers 2500mAh capacity at 10.8 volts with a 27.00Wh energy rating. The pack uses lithium-ion chemistry and includes a fully decoded chip that works like the original. Buyers who need a different voltage or connector will not be served by this model.
Straightforward installation
Many installation videos are available online showing the simple swap process. The battery arrives with shock-absorbing foam for transport protection. The main risk is failing to seat the connector fully, which prevents the vacuum from powering on. Do not disassemble the pack, expose it to fire or water, or store it above 60°C.
Verify your Shark model
Check that your vacuum is one of the listed Shark models and that the original battery carries part number XFBT200, XFBT200EU or XFBT200J. The physical dimensions are 143.12 x 45.50 x 38.40mm and the weight is 178.7g. A new pack reaches peak performance after two or three full charge cycles. Avoid low-quality third-party chargers to preserve battery life.
Highlights
- Replacement for Shark Ion W1 Cord and WV series vacuums
- 2500 mAh capacity delivers 27.00 Wh of runtime
- 8 V lithium-ion chemistry matches original specification
- Compact 143.12 x 45.50 x 38.40 mm form factor fits battery bay
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Ion W1 Cord, UV200CCO, WV200, WV200UK, WV201, WV205, WV220 |
| Part Number | XFBT200, XFBT200EU, XFBT200J |
| Specifications | 143.12 x 45.50 x 38.40 |
| Type | lithium_ion |
| Battery Pack | 143.12 x 45.50 x 38.40 |
| Battery Type | lithium_ion |
| Battery Capacity | 2500.00 milliamp_hours |
| Battery Voltage | 10.80 volts |
Questions about this item
How can I confirm the battery is working correctly after installation?
Charge the pack fully then run the Shark Ion W1 Cord or WV200 series vacuum through a normal cleaning cycle; the 2500 mAh / 27.00 Wh capacity should deliver typical runtime and the built-in protection circuit prevents over-charge or deep discharge.
What comes in the package and what must I supply separately?
The box contains one 10.8 V lithium-ion replacement pack measuring 143.12 x 45.50 x 38.40 mm and weighing 178.7 g; you reuse your existing Shark charger and vacuum — no extra cables or cells are included.
Which part number matches my Shark vacuum model?
This unit replaces Shark part numbers XFBT200, XFBT200EU and XFBT200J and fits Ion W1 Cord, WV200, WV200UK, WV201, WV205 and WV220 models; verify the original battery label before ordering.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
ENERGIZER
ENERGIZER AA Alkaline Battery 24 x 2 Pack (48 Total) 1.5V 10-Year Shelf Life
$67.99
0.00081127BTC
In stock