We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, flat black finish, 47.87 by 30.02 by 4.47 mm, 14 g

Cameron Sino XB10 Battery for Xact Communication Wristlinx

SKU CH-TG31-SBJHP

Replacement lithium-ion battery delivers 550 mAh at 3.7 V for compatible Xact Communication Wristlinx two-way radios

  • Compatible with multiple Xact Wristlinx models including x2x, x33xif and x3x series
  • 550 mAh lithium-ion capacity delivers reliable talk time for two-way radio use
  • 7 V nominal voltage matches original battery specification for correct operation
  • Slim 47.87 x 30.02 x 4.47 mm profile fits securely inside the wrist-worn housing
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuits

Replacement Battery for Xact Wristlinx Radios

The Cameron Sino XB10 is a lithium-ion power cell built to fit Xact Communication Wristlinx two-way radios including the x2x, x2x-2, x33xif, x33xif-2, x3x and x3x-2 models. It delivers a nominal 3.7 V and 550 mAh capacity in a 47.87 x 30.02 x 4.47 mm form factor weighing 14 g. The pack carries ISO9001, RoHS and CE certification and includes overcharge, over-discharge, over-voltage and short-circuit protection.

Straightforward Swap with Connector Care

Installation consists of opening the radio's battery compartment, disconnecting the old pack and seating the new one so its connector mates fully. Many users follow online video guides and finish in minutes. The main pitfall is a partially seated connector, which leaves the radio dead on first power-up; re-seating usually resolves it. Avoid low-quality third-party chargers, as they can degrade cycle life.

Steady Output Through Extended Shifts

Under continuous transmit-receive cycles the cell maintains stable voltage until near depletion, rather than sagging after a few bursts. A fresh pack reaches full runtime after two or three complete charge-discharge cycles. The protection circuitry prevents damage from deep discharge during long shifts. Store below 60 °C or 140 °F and never disassemble or expose to fire or water.

Highlights

  • Compatible with multiple Xact Wristlinx models including x2x, x33xif and x3x series
  • 550 mAh lithium-ion capacity delivers reliable talk time for two-way radio use
  • 7 V nominal voltage matches original battery specification for correct operation
  • Slim 47.87 x 30.02 x 4.47 mm profile fits securely inside the wrist-worn housing
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuits

Specifications

BrandCameron Sino
ModelWristlinx x2x, Wristlinx x2x-2, Wristlinx x33xif, Wristlinx x33xif-2, Wristlinx x3x, Wristlinx x3x-2, x2x Wristlinx, x33xif Wristlinx, x3x Wristlinx, xb10

Questions about this item

How do I confirm the Cameron Sino XB10 is working correctly after installation?

The battery should power on the Wristlinx radio immediately; a new pack reaches full performance after two or three complete charge and discharge cycles.

What comes in the box and what must I supply separately?

The package contains the 550 mAh 3.7 V lithium-ion cell with shock-absorbing foam; you must provide the compatible Wristlinx two-way radio and its charger.

Which version matches my device among the listed Wristlinx models?

This XB10 fits Xact Communication Wristlinx x2x, x2x-2, x33xif, x33xif-2, x3x and x3x-2 — verify the original battery part number XB10 before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.