Cameron Sino X1 Battery 1400mAh 3.6V BP-DC8
Replacement lithium-ion battery delivering 1400 mAh at 3.6 V for Leica X1 cameras
- Pack40.56 x 35.81 x 12.34
- Capacity1400.00 milliamp_hours
- CompatibilitySolar
- Replacement for Leica X1 with part numbers 18706, BP-DC8, EA-DC-8
- 1400 mAh lithium-ion cell delivers 3.6 volts for compatible cameras
- ISO 9001, RoHS and CE certified for safety compliance
- Compact size 40.56 x 35.81 x 12.34 mm fits original battery slot
- New condition unit ready for immediate installation
Replacement battery for Leica X1
This Cameron Sino cell replaces the Leica BP-DC8 and EA-DC-8 packs used in the X1 camera. It delivers 1400mAh at 3.6V using lithium-ion chemistry. The pack measures 40.56 x 35.81 x 12.34mm and carries ISO9001, RoHS and CE certifications.
Suits owners needing a direct substitute
Photographers who want a factory-spec spare for the Leica X1 will find the decoded chip works with the original charger and fuel gauge. Users of other Leica models or different camera brands should look elsewhere because the connector and form factor are model-specific.
Fits the X1 battery compartment directly
The cell slides into the existing slot without adapters or modifications. Its built-in protection circuit guards against overcharge, over-discharge and short circuits, freeing the shooter from carrying a bulky external power bank during long sessions.
Highlights
- Replacement for Leica X1 with part numbers 18706, BP-DC8, EA-DC-8
- 1400 mAh lithium-ion cell delivers 3.6 volts for compatible cameras
- ISO 9001, RoHS and CE certified for safety compliance
- Compact size 40.56 x 35.81 x 12.34 mm fits original battery slot
- New condition unit ready for immediate installation
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | X1 |
| Part Number | 18706, BP-DC8, EA-DC-8 |
| Pack | 40.56 x 35.81 x 12.34 |
| Capacity | 1400.00 milliamp_hours |
| Compatibility | Solar |
Questions about this item
What camera models accept the BP-DC8 part number?
The BP-DC8 part number fits the Leica X1 camera and replaces the original Leica 18706 battery.
Does the 3.6 V lithium-ion cell work in the Siemens MAG 8000 FlowMeter?
The 3.6 V specification matches the Siemens MAG 8000 FlowMeter requirement and the pack carries ISO9001, RoHS and CE certification.
How can I confirm the 1400 mAh pack is performing correctly after the first few charges?
After two or three full charge and discharge cycles the battery should reach its rated capacity and the camera or flow meter should report normal operating time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



