We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black battery pack measuring 158.30 by 59.10 by 22.20 mm with connector and label

Cameron Sino TH-EC/LO Battery 2000mAh 21.60Wh

SKU CH-CJWB-W5S18

Replacement battery for Cattron Theimeg TH-EC/LO crane remote controls, 2000mAh 21.60Wh at 10.8V with overcharge and short-circuit protection

  • Specifications158.30 x 59.10 x 22.20
  • Battery Pack158.30 x 59.10 x 22.20
  • Battery Capacity2000.00 milliamp_hours
  • 2000 mAh capacity powers longer crane-remote sessions
  • 8 V 21.60 Wh rating matches original spec exactly
  • 30 × 59.10 × 22.20 mm form factor drops straight into the TH-EC/LO housing
  • ISO 9001 RoHS CE certified cells with overcharge over-discharge and short-circuit protection
  • Fully decoded chip works like the factory battery from first charge

Compatible Battery for Cattron TH-EC/LO

This replacement battery fits Cattron Theimeg TH-EC/LO crane remote controls. It delivers 2000mAh capacity at 10.8V for 21.60Wh total energy. The pack measures 158.30 x 59.10 x 22.20 mm and weighs 175.0g. A decoded chip ensures original-equivalent communication with the handset.

Who Should Choose This

Technicians maintaining Cattron Theimeg TH-EC/LO remotes needing a direct-fit replacement with certified safety protections. Not for operators using different remote models or part numbers outside the listed B5018-00061, BT081-00053 and BT081-00061 references. Builders requiring higher capacity or alternative voltages must seek other solutions.

Decisive Specification

The 10.8V 2000mAh rating determines whether this pack matches the original equipment electrical requirements. Verify the remote's label shows the same voltage and the part number matches one of the three listed codes before ordering. Physical dimensions must also align with the battery compartment.

Highlights

  • 2000 mAh capacity powers longer crane-remote sessions
  • 8 V 21.60 Wh rating matches original spec exactly
  • 30 × 59.10 × 22.20 mm form factor drops straight into the TH-EC/LO housing
  • ISO 9001 RoHS CE certified cells with overcharge over-discharge and short-circuit protection
  • Fully decoded chip works like the factory battery from first charge

Specifications

BrandCameron Sino
ModelTH- EC/LO
Part NumberB5018-00061, BT081-00053, BT081-00061
Specifications158.30 x 59.10 x 22.20
Battery Pack158.30 x 59.10 x 22.20
Battery Capacity2000.00 milliamp_hours

Questions about this item

What Cattron Theimeg remote model and part numbers must I have for this 2000mAh 21.60Wh battery to fit?

It replaces the original battery in the TH-EC/LO crane remote control and matches part numbers B5018-00061, BT081-00053 and BT081-00061.

Will the fully decoded chip in this 10.8V pack communicate with the original charger and electronics in my TH-EC/LO remote?

Yes, the new chip works just like the original so the remote and its existing charger recognise the pack normally.

How can I confirm the 2000mAh 21.60Wh battery is performing correctly after the first few charge cycles?

After two or three full charge and discharge cycles the pack should reach its rated capacity and power the remote for the expected operating time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.