Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00986163BTC
In stock
Cameron Sino Tempest 2.4GHz Beltpack Battery 1800mAh 3.7V
Replacement lithium-ion battery for Tempest 2.4GHz beltpacks, 1800mAh 3.70V with built-in protection
- Specifications52.25 x 43.00 x 15.60
- Typelithium_ion
- Battery Pack52.25 x 43.00 x 15.60
- Battery Typelithium_ion
- Battery Capacity1800.00 milliamp_hours
- Battery Voltage3.70 volts
- 1800 mAh capacity powers Tempest 2.4 GHz beltpacks for extended sessions
- 70 V lithium-ion cell matches original T-LP1 and TMA-BAT-02 specifications
- ISO 9001, RoHS and CE certified for safe, reliable operation
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection
- Compact 52.25 × 43.00 × 15.60 mm form factor fits beltstation without modification
Replacement Battery for Tempest Beltpacks
This 1800mAh lithium-ion pack replaces the original power source in Tempest 2.4GHz beltstations and wireless beltpacks. It delivers 3.70 volts and 6.66 watt-hours to support extended talk time during productions. The cell fits models including the TMP-R224 and PLI variants. A new fully decoded chip ensures communication with the host device matches the factory battery.
Compact Pack with Protected Circuitry
The battery measures 52.25 by 43.00 by 15.60 millimetres and weighs 91.8 grams, matching the original form factor for a direct swap. Internal protection guards against overcharge, over-discharge, over-voltage and short circuits to preserve cell health. The package includes shock-absorbing foam for safe transport. Installation videos are widely available online for reference.
Lithium-Ion Chemistry Limits
Lithium-ion cells perform best after two or three full charge and discharge cycles when new. Avoid charging with low-quality third-party adapters, as they can reduce overall lifespan. Do not disassemble the pack, expose it to fire or water, or store it above 60 degrees Celsius (140 degrees Fahrenheit). Verify your device model and original part number before purchase to confirm compatibility.
Highlights
- 1800 mAh capacity powers Tempest 2.4 GHz beltpacks for extended sessions
- 70 V lithium-ion cell matches original T-LP1 and TMA-BAT-02 specifications
- ISO 9001, RoHS and CE certified for safe, reliable operation
- Built-in overcharge, over-discharge, over-voltage and short-circuit protection
- Compact 52.25 × 43.00 × 15.60 mm form factor fits beltstation without modification
Specifications
| Brand | cameron sino |
|---|---|
| Model | HME Tempest 2.4GHz beltstation Tempest Wireless Beltpacks |
| Part Number | HME T-LP1 TMA-BAT-02 PBT-LIP-01 2GL-523450-G2107 |
| Specifications | 52.25 x 43.00 x 15.60 |
| Type | lithium_ion |
| Battery Pack | 52.25 x 43.00 x 15.60 |
| Battery Type | lithium_ion |
| Battery Capacity | 1800.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
What beltpack models does the 1800 mAh 3.70 V lithium-ion pack fit?
It fits Tempest 2.4 GHz beltstation, Tempest Wireless Beltpacks, Tempest Wireless Beltpacks PLI and TMP-R224 headsets, matching part numbers 2GL-523450-G2017, PBT-LIP-01, T-LP1 and TMA-BAT-02.
What are the exact dimensions of the 52.25 x 43.00 x 15.60 mm battery pack?
The pack measures 52.25 mm long, 43.00 mm wide and 15.60 mm thick, weighing 91.8 g, so it slides into the original beltpack cavity without modification.
How is the replacement battery installed and what step is often missed?
Remove the old pack, align the connector, press it firmly until it clicks, then run two or three full charge-discharge cycles; the step most users skip is fully seating the connector before closing the case.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
