We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, silver label, 49.47 by 36.55 by 8.97 mm

Cameron Sino Standard Battery for AAXA P1 Pico Projector KP250-03 1700mAh 7.4V

SKU CH-FTD1-NJA92

Replacement 7.4 V 1700 mAh battery for AAXA P1 Pico Projector KP250-03

  • Specifications49.47 x 36.55 x 8.97
  • Battery Pack49.47 x 36.55 x 8.97
  • Battery Capacity1700.00 milliamp_hours
  • Battery Voltage7.4 volts
  • Replacement battery keeps the AAXA P1 Pico Projector running
  • 1700 mAh capacity at 7.4 V matches original power specs
  • Compact 49.47 × 36.55 × 8.97 mm form factor fits the projector bay
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO 9001, RoHS and CE certified for safety and quality

Direct replacement for AAXA P1 projector

This Cameron Sino battery matches the original 7.4 V 1700 mAh specification for the AAXA P1 Pico Projector. It fits the exact 49.47 x 36.55 x 8.97 mm footprint so no adapter or modification is required. The pack is certified to ISO9001, RoHS and CE standards. It arrives new and ready to install.

Fits inside the projector without extra hardware

The cell slides into the existing battery compartment and connects to the stock connector. No soldering, external wiring or additional charger is needed because the projector handles charging normally. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits. This frees you from carrying a separate power bank during mobile presentations.

Restores original runtime for ageing units

Replaces a depleted or swollen factory pack that no longer holds a full charge. The upgrade is worthwhile when the projector shuts down early or fails to power on away from mains power. Buyers who need higher capacity than 1700 mAh or a different voltage should look elsewhere.

Highlights

  • Replacement battery keeps the AAXA P1 Pico Projector running
  • 1700 mAh capacity at 7.4 V matches original power specs
  • Compact 49.47 × 36.55 × 8.97 mm form factor fits the projector bay
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO 9001, RoHS and CE certified for safety and quality

Specifications

Brandcameron sino
ModelP1 Pico Projector
Part NumberKP250-03
Specifications49.47 x 36.55 x 8.97
Battery Pack49.47 x 36.55 x 8.97
Battery Capacity1700.00 milliamp_hours
Battery Voltage7.4 volts

Questions about this item

How long will the 1700 mAh 7.4 V pack run my AAXA P1 before it needs recharging?

The battery stores 1700 mAh at 7.4 V; actual run time depends on the projector's brightness setting and wireless use.

Does the pack get hot or make noise during a full day of projection?

The cell itself is silent and produces only modest warmth; any fan noise or heat comes from the projector, not the battery.

What must I already own to use this KP250-03 replacement?

You need an AAXA P1 Pico Projector that takes the original KP250-03 pack measuring 49.47 x 36.55 x 8.97 mm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.