We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, dark casing, labelled 4000mAh 4.8V

Cameron Sino ST-BTPN 4000mAh 4.8V Nickel-Zinc Battery

SKU CH-Y9BH-XBG0R

Nickel-zinc 4000mAh 4.8V replacement battery for Crestron SmarTouch and STX remote controls

  • Specifications108.00 x 58.00 x 30.00
  • Typenickel_zinc
  • Battery Pack108.00 x 58.00 x 30.00
  • Battery Typenickel_zinc
  • Battery Capacity4000.00 milliamp_hours
  • Battery Voltage4.80 volts
  • Compatible with SmarTouch and STX remotes for direct replacement
  • 4000mAh capacity at 4.8V delivers 19.20Wh for extended runtime
  • Nickel-zinc chemistry provides stable voltage output
  • ISO9001, RoHS and CE certified for safety compliance
  • Compact 108.00 x 58.00 x 30.00mm size fits original battery compartment

Compatible Crestron Remote Battery

This Cameron Sino ST-BTPN pack replaces the original nickel-zinc cell in Crestron SmarTouch 1550, 1700 and STX-series touch-panel remotes. It delivers 4000mAh at 4.8V and matches the factory dimensions of 108.00 x 58.00 x 30.00mm. The integrated protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit events.

Suits Installers Needing a Direct Swap

Technicians servicing the listed SmarTouch and STX models can install this unit without wiring changes or firmware updates. Buyers whose remote uses a different part number or chemistry should verify compatibility before ordering, as this pack is built exclusively for the ST-BTPN specification.

4000mAh Nickel-Zinc Capacity

The single figure that determines runtime is the 4000mAh capacity at 4.8V, yielding 19.20Wh of stored energy. If the original battery supplied a different capacity or voltage, this replacement will not meet the device's power profile.

Highlights

  • Compatible with SmarTouch and STX remotes for direct replacement
  • 4000mAh capacity at 4.8V delivers 19.20Wh for extended runtime
  • Nickel-zinc chemistry provides stable voltage output
  • ISO9001, RoHS and CE certified for safety compliance
  • Compact 108.00 x 58.00 x 30.00mm size fits original battery compartment

Specifications

Brandcameron sino
ModelCrestron SmarTouch 1550 SmarTouch 1700 ST-1700 ST-1550 STX-1700C STX-1550C STX-1550 STX-1500C STX-1700CXP ST-1700C ST-1500C STX-1500CW STX-1700CW
Part NumberCrestron ST-BTPN
Specifications108.00 x 58.00 x 30.00
Typenickel_zinc
Battery Pack108.00 x 58.00 x 30.00
Battery Typenickel_zinc
Battery Capacity4000.00 milliamp_hours
Battery Voltage4.80 volts

Questions about this item

Which Crestron remote models accept the ST-BTPN 4000mAh 4.8V pack?

The ST-BTPN fits SmarTouch 1550, SmarTouch 1700, ST-1500C, ST-1550, ST-1700, ST-1700C, STX-1500C, STX-1500CW, STX-1550, STX-1550C, STX-1700C, STX-1700CW and STX-1700CXP remotes.

Will the nickel-zinc chemistry work with the original charger used for older NiMH packs in my ST-1700?

The replacement includes a fully decoded chip that behaves like the original battery, so the existing Crestron charger will recognise and charge it correctly.

How do I confirm the ST-BTPN is delivering its rated 4000mAh after the first few charge cycles?

Run two or three full charge-and-discharge cycles; the remote should then reach its normal operating time, showing the pack has settled to its rated capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.