We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer camera battery, slim grey finish, 66.5 by 42 by 4 mm

cameron sino SL250 camera battery 1050mAh 3.7V

SKU CH-3G6P-NAS5Y

A 1050 mAh lithium-polymer replacement battery for the SL250 camera, certified to ISO 9001, RoHS and CE

  • Specifications66.50 x 42.00 x 4.00
  • Typelithium_polymer
  • Battery Pack66.50 x 42.00 x 4.00
  • Battery Typelithium_polymer
  • Battery Capacity1050.00 milliamp_hours
  • Battery Voltage3.70 volts_of_alternating_current
  • 1050 mAh capacity powers the SL250 through extended shooting sessions
  • 7 V lithium-polymer chemistry matches original voltage for reliable operation
  • Slim 66.50 × 42.00 × 4.00 mm profile fits the battery compartment exactly
  • ISO 9001, RoHS and CE certifications confirm safety and quality standards
  • Fully decoded chip communicates with the camera like the factory battery

Replacement Battery for SL250

This lithium polymer battery replaces the original power cell in the SL250 device. It delivers 1050mAh capacity at 3.7 volts and weighs 22.0g. The fully decoded chip ensures direct compatibility without modification.

Upgrading from a worn original cell

A degraded battery that no longer holds a full charge is the primary reason to install this unit. The jump is worth it when run-time has dropped noticeably or the device shuts down under load. New cells reach peak performance after two or three complete charge cycles.

Limits of the lithium polymer standard

The chemistry requires a quality charger; low-grade adapters shorten service life. Physical dimensions of 66.50 x 42.00 x 4.00mm fix the fit to the SL250 compartment only. Overcharge, over-discharge and short-circuit protection are built into the pack.

Highlights

  • 1050 mAh capacity powers the SL250 through extended shooting sessions
  • 7 V lithium-polymer chemistry matches original voltage for reliable operation
  • Slim 66.50 × 42.00 × 4.00 mm profile fits the battery compartment exactly
  • ISO 9001, RoHS and CE certifications confirm safety and quality standards
  • Fully decoded chip communicates with the camera like the factory battery

Specifications

Brandcameron sino
ModelBea-fon SL250
Part NumberBea-fon SL250
Specifications66.50 x 42.00 x 4.00
Typelithium_polymer
Battery Pack66.50 x 42.00 x 4.00
Battery Typelithium_polymer
Battery Capacity1050.00 milliamp_hours
Battery Voltage3.70 volts_of_alternating_current

Questions about this item

What are the exact dimensions of this SL250 battery so I can confirm it fits my device?

The battery measures 66.50 x 42.00 x 4.00 mm and weighs 22.0 g, matching the original SL250 specifications for a direct fit.

How do I install the battery and what common step should I avoid missing?

Insert the battery into the SL250 compartment, ensuring the connector is fully seated; the most common mistake is leaving the connector partially attached, which prevents the device from powering on.

After how many charge cycles will this lithium-polymer battery reach its best performance?

The battery achieves optimal performance after 2 or 3 complete charge and discharge cycles, as noted in the manufacturer guidelines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.