Cameron Sino SD-400 Transmitter 450mAh 3.7V lithium polymer battery
Replacement lithium polymer battery for DA210 and iQ transmitters, 450mAh at 3.7V with decoded chip and protection circuits
- Specifications40.57 x 24.62 x 6.40
- Typelithium_polymer
- Battery Pack40.57 x 24.62 x 6.40
- Battery Typelithium_polymer
- Battery Capacity450.00 milliamp_hours
- Battery Voltage3.70 volts
- Replaces DA210, iQ plus, iQ transmitter collars
- 450mAh 3.7V lithium polymer capacity
- Slim 40.57 x 24.62 x 6.40mm profile
- ISO9001, RoHS and CE certified quality
- Built-in overcharge, over-discharge and short-circuit protection
Replacement for DA210 and iQ transmitters
This Cameron Sino SD-400 lithium polymer battery replaces the original BP37T pack in DA210, iQ plus remote transmitter, iQ transmitter and Transmitter iQ dog collars. It delivers 450mAh at 3.7V and weighs 11g. The pack measures 40.57 x 24.62 x 6.40mm and carries ISO9001, RoHS and CE certification.
Verify model and part number before ordering
Check that your collar or transmitter lists DA210, iQ plus remote transmitter, iQ transmitter or Transmitter iQ as the model and BP37T as the battery part number. Confirm the original pack dimensions match 40.57 x 24.62 x 6.40mm and that the connector layout is identical. A new cell reaches full performance after two or three complete charge and discharge cycles.
Fits existing battery compartment and connector
The pack slots into the original battery cavity without modification and uses the same connector polarity. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuit. Shock-absorbing foam in the packaging protects the cell during transit. Do not disassemble, expose to fire or water, or store above 60°C.
Highlights
- Replaces DA210, iQ plus, iQ transmitter collars
- 450mAh 3.7V lithium polymer capacity
- Slim 40.57 x 24.62 x 6.40mm profile
- ISO9001, RoHS and CE certified quality
- Built-in overcharge, over-discharge and short-circuit protection
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | SD-400 Transmitter |
| Part Number | 650-059, DC-16 |
| Specifications | 40.57 x 24.62 x 6.40 |
| Type | lithium_polymer |
| Battery Pack | 40.57 x 24.62 x 6.40 |
| Battery Type | lithium_polymer |
| Battery Capacity | 450.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
What is included in the box and do I need to buy a charger separately?
The package contains the SD-400 battery with built-in protection chip and shock-absorbing foam. A compatible charger for the transmitter is not included and must be sourced separately.
Which part number should I match to be sure this 450 mAh 3.7 V pack fits my collar?
Verify that your original battery carries part number BP37T or that the collar is listed as DA210, iQ plus remote transmitter, iQ transmitter or Transmitter iQ.
What does the 1.66 Wh rating mean for actual run-time in the transmitter?
At 3.7 V the cell stores 1.66 Wh, which typically powers the compatible collar transmitter for several days of normal use before recharging is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BatteryJack inc. PowerStar Portalac GS PE6V1.2 6V 1.2Ah dry cell battery
BatteryJack inc. EnerSys Hawker Cyclon 0809-0012 6V 5.0Ah dry cell battery
- Batteries
- 1-pack



