Cameron Sino RG556 FL806475 5400mAh 3.80V standard battery
A 5400 mAh lithium-polymer replacement cell for the Anbernic RG556 handheld, matching the original FL806475 specifications
- Specifications72.00 x 63.00 x 7.80
- Typelithium_polymer
- Battery Pack72.00 x 63.00 x 7.80
- Battery Typelithium_polymer
- Battery Capacity5400.00 milliamp_hours
- Battery Voltage3.80 volts
- Direct replacement for Anbernic RG556 with FL806475 part number
- 5400mAh lithium-polymer cell delivers 20.52Wh at 3.80V
- Certified to ISO 9001, RoHS and CE safety standards
- Fully decoded chip works like the original battery
- Compact 72.00 x 63.00 x 7.80mm form factor fits the console
Replacement battery for Anbernic RG556
This 5400 mAh lithium-polymer cell matches the original FL806475 specifications at 3.80 V and 20.52 Wh. It fits the RG556 handheld console and uses a fully decoded chip that works like the factory pack. Buyers needing a different voltage or a higher capacity for another device cannot use this unit.
Thermal behaviour and power draw
The battery delivers its rated 5400 mAh at 3.80 V during normal handheld gaming sessions. Internal protection guards against overcharge, over-discharge, over-voltage and short circuits. No active cooling or fan is involved, so operation stays silent and surface temperature remains low under typical loads.
Bundled protection and installation aids
Each pack ships with shock-absorbing foam for transit safety. The decoded chip enables plug-and-play compatibility without firmware updates. Online installation guides are referenced by the manufacturer, but no tools, screws or charging accessories are included in the box.
Highlights
- Direct replacement for Anbernic RG556 with FL806475 part number
- 5400mAh lithium-polymer cell delivers 20.52Wh at 3.80V
- Certified to ISO 9001, RoHS and CE safety standards
- Fully decoded chip works like the original battery
- Compact 72.00 x 63.00 x 7.80mm form factor fits the console
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | RG556 |
| Part Number | FL806475 |
| Specifications | 72.00 x 63.00 x 7.80 |
| Type | lithium_polymer |
| Battery Pack | 72.00 x 63.00 x 7.80 |
| Battery Type | lithium_polymer |
| Battery Capacity | 5400.00 milliamp_hours |
| Battery Voltage | 3.80 volts |
Questions about this item
How do I install the FL806475 battery in my RG556 and what step do people miss?
Open the RG556, disconnect the old pack, align the 72.00 x 63.00 x 7.80 mm replacement, and press the connector until it clicks; the step often missed is fully seating the plug before reassembly.
What maintenance will this 5400mAh lithium-polymer pack need later?
Run two or three full charge and discharge cycles when new, avoid chargers below 3.80 V spec, and store below 60 °C; no scheduled replacement interval is required beyond normal capacity fade.
What limit appears first during long gaming sessions on the RG556?
The 20.52 Wh capacity sets runtime; after several hours the voltage drops to the console's low-power threshold, so the pack hits its energy limit before thermal throttling becomes an issue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



