Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081465BTC
In stock
Cameron Sino Replacement Battery for Tineco iFloor 3 4000mAh 86.40Wh
Replacement battery for Tineco iFloor 3 vacuum cleaners delivering 4000mAh at 21.6V
- 4000 mAh capacity powers longer cleaning sessions
- 40 Wh energy rating matches original specifications
- 6 V output maintains consistent suction performance
- Built-in protection guards against overcharge and short circuits
- Fully decoded chip works identically to the factory battery
Direct replacement for Tineco iFloor 3
This 4000mAh 86.40Wh lithium-ion pack matches the original CL1879-6S1P-01 specification and fits FW030100US, FW030200US, iFloor 3 and iFloor 3-01 floor washers. A fully decoded chip communicates with the machine exactly like the factory cell, so run-time and charge reporting stay accurate. It is built to the same 21.6 V nominal voltage and 153.60 x 53.30 x 50.00 mm footprint, weighing 490.0 g. Buyers with other Tineco models not listed here will need a different pack.
Runs cool with built-in protection circuits
Over-charge, over-discharge, over-voltage and short-circuit safeguards keep the cell stable during normal cleaning cycles, so surface temperature stays low and the pack does not throttle. The integrated management electronics draw negligible standby current, preserving stored energy between uses. No fan or active cooling is required, keeping acoustic output at zero. Users who routinely drain the battery to empty every session should still allow the recommended two to three full cycles before judging peak capacity.
Drops into the existing battery bay
The pack uses the original connector and mounting points, so no tools or adapter cables are needed; installation videos show the swap taking under a minute. Shock-absorbing foam in the retail box protects the cell during transit, and the 12-month manufacturer warranty covers defects. Keep the charger that came with the machine — third-party adapters can shorten service life. Do not disassemble, expose to fire or water, or store above 60 °C.
Highlights
- 4000 mAh capacity powers longer cleaning sessions
- 40 Wh energy rating matches original specifications
- 6 V output maintains consistent suction performance
- Built-in protection guards against overcharge and short circuits
- Fully decoded chip works identically to the factory battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Floor 2.0Slim, Floor one 1.0, Floor One S3-01, FM25-01, FM26-01, FW030100EU, FW030100US, FW030200US, FW030400US, FW030500US, FW040100US, FW040500US, FW1004, FW200100, FW25M-01, FW26M-02, FW700CN, iFloor 3, iFloor 3 Breeze, iFloor 3-01, iFloor-01, VWV8 |
Questions about this item
How do I install the replacement battery in my Tineco iFloor 3 and what step is often missed?
Remove the old pack, align the new 153.60 x 53.30 x 50.00 mm battery, and ensure the connector is fully seated — the most common mistake is a partially connected plug.
What maintenance will this 4000mAh 86.40Wh battery need later?
Run two or three full charge and discharge cycles when new to reach peak capacity; afterwards, avoid low-quality third-party chargers to preserve lifespan.
What limit appears first during extended cleaning sessions with this 21.6 V pack?
The built-in protection circuit will cut power if the cells overheat, over-discharge, or exceed voltage limits, stopping the vacuum before damage occurs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
