We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with black plastic casing and connector end

Cameron Sino Replacement Battery for Shark Ion W1 Cord 2500mAh 10.8V

SKU CH-S4VC-SJDXN

Lithium-ion replacement battery delivering 2500mAh at 10.8V for Shark Ion W1 Cord and WV series vacuums

  • Specifications143.12 x 45.50 x 38.40
  • Typelithium_ion
  • Battery Pack143.12 x 45.50 x 38.40
  • Battery Typelithium_ion
  • Battery Capacity2500.00 milliamp_hours
  • Battery Voltage10.80 volts
  • 2500 mAh capacity extends cleaning sessions
  • 8 V lithium-ion chemistry matches original specifications
  • Fits Shark Ion W1 Cord, WV200, WV200UK, WV201, WV205, WV220
  • 12 x 45.50 x 38.40 mm form factor drops straight into the hand vac
  • Built-in protection against overcharge, over-discharge and short circuits

Compatible Shark Vacuum Models

This replacement battery fits the Shark Ion W1 Cord, WV200, WV200UK, WV201, WV205 and WV220 cordless vacuums. It replaces the original Shark part numbers XFBT200, XFBT200EU and XFBT200J. The lithium-ion pack delivers 2500mAh capacity at 10.8 volts for 27.00Wh of energy. It is designed for owners of these specific models who need a direct swap.

Verify Model And Part Number First

Before ordering, confirm the model number printed on your vacuum and the part number on your existing battery. The pack measures 143.12 x 45.50 x 38.40 mm and weighs 178.7 g, so it must match the original cavity. A new battery reaches its best performance after two or three full charge and discharge cycles. Ensure the connector seats properly during installation.

Sustained Runtime And Protection

The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuits during extended cleaning sessions. This maintains stable output as the pack depletes rather than cutting out early. A fully decoded chip communicates with the vacuum electronics exactly like the original battery. The foam-padded packaging protects the cells from transit shock.

Highlights

  • 2500 mAh capacity extends cleaning sessions
  • 8 V lithium-ion chemistry matches original specifications
  • Fits Shark Ion W1 Cord, WV200, WV200UK, WV201, WV205, WV220
  • 12 x 45.50 x 38.40 mm form factor drops straight into the hand vac
  • Built-in protection against overcharge, over-discharge and short circuits

Specifications

BrandCameron Sino
ModelIon W1 Cord, UV200CCO, WV200, WV200UK, WV201, WV205, WV220
Part NumberXFBT200, XFBT200EU, XFBT200J
Specifications143.12 x 45.50 x 38.40
Typelithium_ion
Battery Pack143.12 x 45.50 x 38.40
Battery Typelithium_ion
Battery Capacity2500.00 milliamp_hours
Battery Voltage10.80 volts

Questions about this item

Does the battery include any tools or a charger for installation?

The package contains the 2500mAh 10.8V lithium-ion battery and shock-absorbing foam for transport protection. No tools or charger are included.

Which Shark models and part numbers does this 2500mAh battery replace?

It replaces Shark part numbers XFBT200, XFBT200EU and XFBT200J in Ion W1 Cord, WV200, WV200UK, WV201, WV205 and WV220 vacuums.

What run-time change should I expect from the 27.00Wh capacity in a Shark Ion W1 Cord?

The 27.00Wh rating restores the original energy capacity; a new pack reaches full performance after two or three complete charge and discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.