Cameron Sino replacement battery for Motorola GP3188 XIR GP3688 P3688
Replacement lithium-polymer battery for Motorola GP3188 XIR, GP3688 and P3688 two-way radios, 182.0 g with ISO9001, RoHS and CE certification
- TypeReplacement for
- ISO9001 RoHS CE certified for safety
- 0 g lightweight design for easy carry
- 60 x 87.00 x 66.70 mm exact fit for GP3188 XIR GP3688 P3688
- Fully decoded chip works like original battery
- Overcharge over-discharge short-circuit protection extends life
Compatible replacement battery
This replacement battery fits the Motorola GP3188 XIR GP3688 P3688 two-way radios. It uses a lithium polymer cell and weighs 182.0 grams with dimensions of 139.60 x 87.00 x 66.70 millimetres. The unit is sold new and carries ISO9001 RoHS and CE certification.
Sustained operation characteristics
The battery includes overcharge over discharge over voltage and short circuit protection to maintain safe operation during extended use. A fully decoded chip works like the original and the pack reaches its best performance after two or three complete charge cycles. Shock absorbing foam protects the cell during transport.
Pre purchase checks
Verify the exact model number of your radio and the part number of your original battery before ordering. Ensure the connector is properly seated when installing the new cell. Avoid low quality third party chargers as they can shorten the battery's service life.
Highlights
- ISO9001 RoHS CE certified for safety
- 0 g lightweight design for easy carry
- 60 x 87.00 x 66.70 mm exact fit for GP3188 XIR GP3688 P3688
- Fully decoded chip works like original battery
- Overcharge over-discharge short-circuit protection extends life
Specifications
| Brand | cameron sino |
|---|---|
| Model | Motorola GP3688 P3688 GP3188 XIR |
| Type | Replacement for |
Questions about this item
Does the 182.0 g lithium-polymer pack run hot during long shifts?
The battery weighs 182.0 g and uses lithium-polymer chemistry; it meets ISO 9001, RoHS and CE standards and includes over-charge, over-discharge, over-voltage and short-circuit protection to keep temperatures stable during extended use.
What charger or radio do I already need for this pack to work?
You need a Motorola GP3188 XIR, GP3688 or P3688 two-way radio; the battery is a direct replacement for the original pack and connects to the radio’s existing charging circuit.
Will the 139.60 × 87.00 × 66.70 mm case fit the battery compartment on my older GP3188 XIR?
Yes — the pack’s dimensions are 139.60 × 87.00 × 66.70 mm, matching the original battery spec for the GP3188 XIR, GP3688 and P3688, so it slides into the same compartment without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



