We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack with wire connector, matte finish

Cameron Sino Replacement Battery for GX-2 Smart Arm 2500mAh 19.2V

SKU CH-0AHS-081NC

Nickel-zinc replacement battery delivers 2500 mAh at 19.2 V for GX-2 Smart Arm and compatible medical monitors

  • Specifications102.20 x 43.30 x 43.30
  • Typenickel_zinc
  • Battery Pack102.20 x 43.30 x 43.30
  • Battery Typenickel_zinc
  • Battery Capacity2500.00 milliamp_hours
  • Battery Voltage19.20 volts
  • Powers GX-2 Smart Arm and compatible monitors
  • 2500 mAh nickel-zinc chemistry delivers 48 Wh runtime
  • 2 V output matches original equipment specification
  • Compact 102.20 x 43.30 x 43.30 mm form factor fits battery bay
  • ISO 9001 certified production with decoded chip for direct replacement

Replacement Battery for GX-2 Smart Arm

This nickel-zinc replacement battery is built for the GX-2 Smart Arm, NIBP GX-2, Smartarm SPO2 and SS100A Smart Sat medical devices. It matches the original part numbers 460005-078, AS10973, B10973, BATT/110476, MB210B and OM10973. The pack delivers 2500mAh at 19.2V for compatible monitoring equipment.

Nickel-zinc chemistry and fixed voltage

Nickel-zinc cells operate at a fixed 19.2V output with a 48.00Wh energy rating. The chemistry requires a charger designed for this specific voltage profile; using an incompatible adapter will reduce service life. Full capacity is reached after two or three complete charge and discharge cycles.

Medical-grade build with decoded chip

The pack measures 102.20 x 43.30 x 43.30mm and weighs 482.0g, matching the original form factor for direct installation. A fully decoded chip communicates with the host device exactly like the factory battery. Overcharge, over-discharge, over-voltage and short-circuit protection are integrated. Not suitable for devices requiring a different voltage, connector layout or capacity.

Highlights

  • Powers GX-2 Smart Arm and compatible monitors
  • 2500 mAh nickel-zinc chemistry delivers 48 Wh runtime
  • 2 V output matches original equipment specification
  • Compact 102.20 x 43.30 x 43.30 mm form factor fits battery bay
  • ISO 9001 certified production with decoded chip for direct replacement

Specifications

BrandCameron Sino
ModelReplacement battery
Part Number460005-078, AS10973, B10973, BATT/110476, MB210B, OM10973
Specifications102.20 x 43.30 x 43.30
Typenickel_zinc
Battery Pack102.20 x 43.30 x 43.30
Battery Typenickel_zinc
Battery Capacity2500.00 milliamp_hours
Battery Voltage19.20 volts

Questions about this item

Which part number matches my GX-2 Smart Arm?

This replacement battery carries part numbers 460005-078, AS10973, B10973, BATT/110476, MB210B and OM10973; match any of those to your original battery label.

What does the 2500mAh capacity mean for daily use on the GX-2 Smart Arm?

At 19.2 volts and 48.00 watt-hours the pack delivers 2500 milliamp-hours, powering the Smart Arm through a typical monitoring shift before recharge.

What battery chemistry is used and what voltage does it provide?

The pack uses nickel-zinc cells and supplies a nominal 19.2 volts, matching the original specification for the GX-2 Smart Arm series.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.