We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, matte dark finish, labelled 2500mAh 9.25Wh

Cameron Sino Replacement Battery for FLIR DM284 DM285 2500mAh 9.25Wh

SKU CH-X2YD-A5807

Nickel-zinc replacement cell delivering 2500 mAh and 9.25 Wh for FLIR DM284 and DM285 imaging multimeters

  • Typenickel_zinc
  • Pack64.78 x 48.15 x 10.95
  • Chemicalnickel_zinc
  • Capacity2500mAh / 9.25Wh
  • CompatibilityCamera
  • Compatible with FLIR DM284 and DM285 thermal imagers
  • 2500 mAh capacity delivers 9.25 Wh of runtime
  • Nickel-zinc chemistry with 3.7 V nominal voltage
  • Compact 64.78 × 48.15 × 10.95 mm form factor
  • Certified to ISO 9001, RoHS and CE standards

Direct Replacement for FLIR Thermal Cameras

This Cameron Sino battery replaces the original TA04-KIT pack used in FLIR DM284, DM284 Imaging Multimeter, DM285 and DM285 Imaging Multimeter models. It delivers 2500mAh at 3.7V for 9.25Wh of energy. A fully decoded chip ensures the meter recognises the pack and reports remaining capacity correctly. The nickel-zinc chemistry matches the factory specification.

Suits Technicians Restoring Original Runtime

Ideal for engineers and electricians who need their thermal imagers to last a full shift without carrying a charger. The 60.0g pack fits the existing battery cavity measuring 64.78 x 48.15 x 10.95mm. Buyers who require a higher capacity than 2500mAh or a different voltage should look at other solutions because this cell replicates the OEM rating exactly.

9.25Wh Capacity Handles Extended Scans

The 9.25Wh rating comfortably powers a DM284 or DM285 through long inspection sessions and multiple image captures. Runtime ends when the meter signals low voltage, typically after several hours of continuous thermal imaging. Do not store the pack above 60°C or 140°F, and allow two to three full charge cycles before judging maximum endurance.

Highlights

  • Compatible with FLIR DM284 and DM285 thermal imagers
  • 2500 mAh capacity delivers 9.25 Wh of runtime
  • Nickel-zinc chemistry with 3.7 V nominal voltage
  • Compact 64.78 × 48.15 × 10.95 mm form factor
  • Certified to ISO 9001, RoHS and CE standards

Specifications

BrandCameron Sino
ModelReplacement battery
Part NumberTA04, TA04-KIT
Typenickel_zinc
Pack64.78 x 48.15 x 10.95
Chemicalnickel_zinc
Capacity2500mAh / 9.25Wh
CompatibilityCamera

Questions about this item

Which FLIR imaging multimeters does this replacement battery fit?

It is compatible with the FLIR DM284 and DM285 imaging multimeters, matching part number TA04-KIT.

Will the battery work with the original charger that came with my FLIR device?

Yes, the fully decoded chip operates like the original battery, so the standard FLIR charger can be used.

How can I confirm the battery is functioning correctly after installing it?

The multimeter should power on, show a full charge indicator, and run for the expected duration based on the 2500mAh capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.