We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black battery pack with two terminals, 75.9 by 68.5 by 43.2 mm

Cameron Sino Replacement Battery for DAITEM 360. 21 X 14500mAh 3.6V

SKU CH-9MSY-9TTEZ

Replacement battery for DAITEM alarm systems, 14500mAh at 3.6V with overcharge and short-circuit protection

  • Specifications75.90 x 68.50 x 43.20
  • Battery Pack75.90 x 68.50 x 43.20
  • Battery Capacity14500.00 milliamp_hours
  • Battery Voltage3.6 volts
  • Replacement for DAITEM 360. 21 X alarm systems
  • 14500 mAh capacity powers extended standby periods
  • 6 V lithium chemistry matches original specification
  • Dimensions 75.90 x 68.50 x 43.20 mm fit existing housing
  • ISO 9001 RoHS CE certified for safety compliance

Replacement Battery for DAITEM 360. 21 X

This lithium battery replaces the original power pack in DAITEM alarm control panels and sirens. It delivers 14500mAh at 3.6 volts and fits models such as the 360. 21 X, SH421AX and SH424AX units. The pack is certified to ISO9001, RoHS and CE standards.

Fit and Installation

The battery measures 75.90 x 68.50 x 43.20 mm and weighs 260.0 g, matching the factory dimensions for a direct swap. It uses part numbers BATLi22 and BatLi23 and is compatible with central units including S202-22F, S303-22F, S404-22F and S660-22F. A decoded chip ensures communication with the host system.

Ideal for Maintenance, Not for New Builds

Installers servicing existing DAITEM radio alarm installations will find this a direct replacement. Builders specifying a fresh system or needing a different voltage or capacity should look elsewhere. The pack requires a few charge cycles to reach full performance.

Highlights

  • Replacement for DAITEM 360. 21 X alarm systems
  • 14500 mAh capacity powers extended standby periods
  • 6 V lithium chemistry matches original specification
  • Dimensions 75.90 x 68.50 x 43.20 mm fit existing housing
  • ISO 9001 RoHS CE certified for safety compliance

Specifications

BrandCameron Sino
Model214-27D, 216-27D, 260-27D, 312-21, 330-21F, 332-21D, 337-21D, 340-21F, 360. 21 X, 360-21F, 360-21X, 361-21F, 362-21F, 363-21F, 364-21F, 370-21F, 371-21D, 371-21F, 372-21, 3771, 400-21F, 401-21F, 401-21X, 404-21F, 405-16X, 405-21F, 420-21F, 421-21F, 421-21X, 422-21X, 450-29X, 470-29X, 471-29X, 472-29X, 473-16X, 474-29X, 476-29X, 495-16X, 495-21X, 672-21F, 686-21F, 686-21W, 686-21W - D21 Code-Einrichtung, 700-16X, 700-21F, 700-21X, 701-21X, 908-21X, Central S202-22F, Central siren 363 21F, Central siren transmitter 361 , Central siren transmitter 362 , Central siren transmitter 371 , D
Part NumberBAT22, BAT23, BATLi22, BatLi23, MPU01X
Specifications75.90 x 68.50 x 43.20
Battery Pack75.90 x 68.50 x 43.20
Battery Capacity14500.00 milliamp_hours
Battery Voltage3.6 volts

Questions about this item

How long will the 14500mAh capacity last before the alarm panel signals a low-battery fault?

Runtime depends on the panel's current draw; the 52.20Wh pack typically powers compatible DAITEM centrals for several months between charges.

Does the pack run hot or make any noise during continuous 24-hour operation?

The lithium cell stays near ambient temperature and is completely silent — no fan or moving parts are present.

Which DAITEM part numbers must my existing control unit show for this battery to fit?

Match your unit's label to BATLi22, BatLi23, BAT22 or BAT23 and to a model such as 360.21 X, S404-22F, S660-22F or SH421AX.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.