We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, dark casing, connector on one end

cameron sino Replacement Battery for CECOTEC Conga 5090/5490/6090/7090 5200mAh 14.8V

SKU CH-VWMD-HXQ3A

5200 mAh lithium-polymer replacement battery fits CECOTEC Conga 5090, 5490, 6090 and 7090 robot vacuums

  • Specifications170.20 x 77.20 x 43.80
  • Typelithium_polymer
  • Battery Pack170.20 x 77.20 x 43.80
  • Battery Typelithium_polymer
  • Battery Capacity5200.00 milliamp_hours
  • Battery Voltage14.80 volts
  • Compatible with Conga 5090, 5490, 6090 and 7090 robot vacuums
  • 5200 mAh capacity delivers 76.96 Wh for extended cleaning sessions
  • 8 V lithium-polymer chemistry matches original power specifications
  • Compact 170.20 × 77.20 × 43.80 mm pack fits the original battery bay
  • Built-in protection against over-charge, over-discharge and short circuits

Compatible Robot Models

This replacement battery fits CECOTEC Conga 5090, 5490, 6090 and 7090 robots. It matches part number MH1-4S2P-300S and the Sencor SRV 9550BK unit. The lithium-polymer pack delivers 5200mAh at 14.8V for direct replacement.

Sustained Runtime Behaviour

A fresh pack reaches its best capacity after two or three full charge and discharge cycles. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short-circuit events during long cleaning sessions. Proper connector seating is required for stable power delivery.

Interface Practical Limits

The battery uses the original connector and a fully decoded chip so the robot recognises it without modification. Dimensions of 170.20 x 77.20 x 43.80mm and 490.0g weight match the factory pack. Low-quality third-party chargers can shorten service life and are not recommended.

Highlights

  • Compatible with Conga 5090, 5490, 6090 and 7090 robot vacuums
  • 5200 mAh capacity delivers 76.96 Wh for extended cleaning sessions
  • 8 V lithium-polymer chemistry matches original power specifications
  • Compact 170.20 × 77.20 × 43.80 mm pack fits the original battery bay
  • Built-in protection against over-charge, over-discharge and short circuits

Specifications

Brandcameron sino
ModelCECOTEC Conga 5090 Conga 5490 Conga 6090 Conga 7090 Sencor SRV 9550BK
Part NumberCECOTEC MH1-4S2P-300S MH1-4S2P-300S Sencor SRX 0507 SRX 0507
Specifications170.20 x 77.20 x 43.80
Typelithium_polymer
Battery Pack170.20 x 77.20 x 43.80
Battery Typelithium_polymer
Battery Capacity5200.00 milliamp_hours
Battery Voltage14.80 volts

Questions about this item

Does the 5200 mAh 14.8 V lithium-polymer pack run hot during a full cleaning cycle?

The battery uses standard lithium-polymer chemistry and a built-in protection circuit; it operates at normal temperatures for robot vacuum packs of this capacity.

What must I already own so the CECOTEC MH1-4S2P-300S replacement fits and charges?

You need one of the listed Conga models — 5090, 5490, 6090 or 7090 — with the original charging dock and the matching battery connector.

Will this 170.20 × 77.20 × 43.80 mm pack work in an older Conga 5090 that still has its original mainboard?

Yes, the pack is built to the exact dimensions and connector spec of the original MH1-4S2P-300S cell used in the 5090.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.