We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, silver-grey finish, thin profile, connector on one edge

Cameron Sino replacement battery for Brondi Smartphone 4G ICP445573P 2200mAh 3.7V

SKU CH-HTMH-RBC2W

Replacement lithium-ion battery for Brondi Smartphone 4G delivering 2200mAh at 3.7V

  • Specifications76.50 x 56.80 x 5.10
  • Typelithium_ion
  • Battery Pack76.50 x 56.80 x 5.10
  • Battery Typelithium_ion
  • Battery Capacity2200.00 milliamp_hours
  • Battery Voltage3.70 volts_of_alternating_current
  • Replaces the original Brondi Smartphone 4G battery
  • 2200 mAh capacity restores full runtime
  • 50 × 56.80 × 5.10 mm fits the original compartment
  • ISO 9001, RoHS and CE certified for safety
  • Built-in protection against overcharge, over-discharge and short circuit

Direct replacement for Brondi Smartphone 4G

This Cameron Sino lithium-ion cell is built to the original specifications for the Brondi Smartphone 4G. It matches the factory part number ICP445573P and delivers 2200mAh at 3.7 volts. The pack measures 76.50 by 56.80 by 5.10 millimetres and weighs 46.0 grams. A decoded chip ensures the phone recognises the battery immediately.

Suitable for owners needing a like-for-like swap

The unit fits only the Brondi Smartphone 4G with part number ICP445573P. Buyers with a different Brondi model or any other brand should verify their original battery code before ordering. Users who require a higher capacity than 2200mAh or a different voltage will need an alternative solution. No installation tools or adhesives are included in the package.

Critical spec: 3.7 volt 2200mAh lithium-ion

The voltage and capacity combination determines whether the phone will charge correctly and report accurate remaining time. A cell with a different voltage will not operate safely in this device. The decoded chip communicates with the handset's power management so the fuel gauge stays accurate. Confirm the ICP445573P part number on the old battery before purchase.

Highlights

  • Replaces the original Brondi Smartphone 4G battery
  • 2200 mAh capacity restores full runtime
  • 50 × 56.80 × 5.10 mm fits the original compartment
  • ISO 9001, RoHS and CE certified for safety
  • Built-in protection against overcharge, over-discharge and short circuit

Specifications

BrandCameron Sino
ModelSMARTPHONE 4G
Part NumberICP445573P
Specifications76.50 x 56.80 x 5.10
Typelithium_ion
Battery Pack76.50 x 56.80 x 5.10
Battery Typelithium_ion
Battery Capacity2200.00 milliamp_hours
Battery Voltage3.70 volts_of_alternating_current

Questions about this item

What phone model must I own for this ICP445573P battery to fit?

It is made for the Brondi Smartphone 4G; check that your original battery carries the same ICP445573P part number before ordering.

Will the 3.7 V, 2200 mAh cell work with the original charging circuit in my older Brondi handset?

Yes — the fully decoded chip matches the original specifications, so the phone's existing charger and protection logic recognise it normally.

How can I confirm the battery is performing correctly after the first few charge cycles?

After two or three full charge and discharge cycles the capacity should settle at the rated 2200 mAh and the phone should report normal voltage without unexpected shutdowns.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.