We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, grey plastic casing, connector on one end

cameron sino Replacement Battery for Anker A3301011 A3305 PowerConf USB-C 5200mAh 3.7V

SKU CH-NTDV-DWKWX

A 5200 mAh 3.7 V lithium-polymer replacement battery for Anker PowerConf USB-C speakers A3301011 and A3305, part 539028

  • Specifications70.00 x 19.80 x 19.80*2
  • Typelithium_polymer
  • Battery Pack70.00 x 19.80 x 19.80*2
  • Battery Typelithium_polymer
  • Battery Capacity5200.00 milliamp_hours
  • Battery Voltage3.70 volts_of_alternating_current
  • 5200 mAh capacity powers the Anker PowerConf USB-C speaker for long meetings
  • 7 V lithium-polymer chemistry matches the original A3301011 and A3305 battery specs
  • 00 × 19.80 × 19.80 mm form factor fits the speaker without modification
  • ISO 9001, RoHS and CE certification confirms regulated manufacturing quality
  • New fully decoded chip works like the factory pack for plug-and-play installation

Compatible Replacement Battery

This lithium-polymer battery replaces the original unit in Anker A3301011 and A3305 PowerConf USB-C conference speakers. It matches the factory part number 539028 and is supplied new with ISO9001, RoHS and CE certification. The pack is designed for indoor or outdoor use and includes a fully decoded chip that works like the original.

5200 mAh Capacity and Runtime

Rated at 5200 mAh and 19.24 Wh, the cell delivers the same energy reserve as the stock battery for extended meetings. It operates at 3.7 V and reaches peak performance after two or three full charge cycles. The pack is not suited for devices that require a different voltage or a higher watt-hour rating.

Drop-In Fit for PowerConf Speakers

The battery measures 70.00 x 19.80 x 19.80 mm (dual-cell layout) and weighs 96.0 g, matching the original mechanical envelope. Installation requires only reconnecting the existing connector; no soldering or case modification is needed. Avoid low-quality third-party chargers to preserve cycle life and safety protections.

Highlights

  • 5200 mAh capacity powers the Anker PowerConf USB-C speaker for long meetings
  • 7 V lithium-polymer chemistry matches the original A3301011 and A3305 battery specs
  • 00 × 19.80 × 19.80 mm form factor fits the speaker without modification
  • ISO 9001, RoHS and CE certification confirms regulated manufacturing quality
  • New fully decoded chip works like the factory pack for plug-and-play installation

Specifications

Brandcameron sino
ModelAnker PowerConf USB-C Conference Speaker A3301011 A3305
Part NumberAnker 539028
Specifications70.00 x 19.80 x 19.80*2
Typelithium_polymer
Battery Pack70.00 x 19.80 x 19.80*2
Battery Typelithium_polymer
Battery Capacity5200.00 milliamp_hours
Battery Voltage3.70 volts_of_alternating_current

Questions about this item

Will this 5200 mAh battery fit the original compartment in my Anker A3301011 PowerConf USB-C speaker?

The replacement measures 70.00 x 19.80 x 19.80 mm per cell and matches the Anker 539028 part number, so it sits in the same space as the factory pack.

How can I confirm the new lithium-polymer pack is working correctly after I install it?

Connect the speaker to USB-C power until the status light shows a full charge, then run a typical conference call; the runtime should match the original 5200 mAh / 19.24 Wh rating.

Does the box include only the battery or are tools and adhesive supplied as well?

The package contains the single 96.0 g lithium-polymer cell with its pre-fitted connector and protective foam; no screwdrivers, pry tools or glue strips are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.