We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion camera battery with dark grey textured casing and gold contacts

Cameron Sino Replacement Battery 4000mAh 29.60Wh for Canon BP-85

SKU CH-88Z6-22G8B

Replacement lithium-ion battery rated 4000mAh and 29.60Wh fits Canon BP-85 camcorders including GL1, GL2, XL1, XL1S and XL2 models

  • Typelithium_ion
  • Pack70.88 x 38.75 x 38.35
  • Chemicallithium_ion
  • Capacity4000mAh / 29.60Wh
  • CompatibilityCamera
  • Extended shooting time with 4000mAh 29.60Wh capacity
  • Reliable power from lithium-ion chemistry and 7.4V output
  • Fits Canon GL1 GL2 XL1 XL1S XL2 and many ES models
  • Fully decoded chip works like the original Canon BP-85
  • Compact 70.88 x 38.75 x 38.35mm design weighs 194.5g

Replacement Battery for Canon Camcorders

This lithium-ion replacement battery delivers 4000mAh and 29.60Wh at 7.4V for a wide range of Canon camcorders including the ES, GL, UC-X, XL and ULTURA series. It uses a fully decoded chip that communicates with the camera just like the original Canon BP-85 pack. The cell measures 70.88 x 38.75 x 38.35mm and weighs 194.5g.

Practical Limits of Lithium-Ion Chemistry

Like all lithium-ion cells this pack performs best between 12°C and 40°C and should never be stored above 60°C. Capacity will reach its full rating after two or three complete charge and discharge cycles. Using a low-quality third-party charger can shorten the overall service life of the battery.

Capacity and Headroom for Extended Shoots

The 29.60Wh rating provides enough energy for long recording sessions on compatible camcorders such as the XL1, XL1S, XL2, GL1 and GL2. Runtime scales with the camera's power draw so high-bitrate modes or cold weather will reduce the available shooting time. The single pack design means there is no hot-swap capability; a second battery is required for uninterrupted operation.

Highlights

  • Extended shooting time with 4000mAh 29.60Wh capacity
  • Reliable power from lithium-ion chemistry and 7.4V output
  • Fits Canon GL1 GL2 XL1 XL1S XL2 and many ES models
  • Fully decoded chip works like the original Canon BP-85
  • Compact 70.88 x 38.75 x 38.35mm design weighs 194.5g

Specifications

BrandCameron Sino
ModelReplacement battery
Part NumberCGR-B/403, VW-VBD2, VW-VBD3, VW-VBD5, VW-VBDR1
Typelithium_ion
Pack70.88 x 38.75 x 38.35
Chemicallithium_ion
Capacity4000mAh / 29.60Wh
CompatibilityCamera

Questions about this item

Which capacity version should I choose for my Canon camcorder?

This battery is offered in a single 4000mAh / 29.60Wh capacity, so there is no alternative version to select.

What does the 29.60Wh rating mean for actual recording time?

At 7.4V the 29.60Wh pack stores enough energy for roughly four hours of typical camcorder use, though exact run-time depends on the model and shooting settings.

What connector standard does the BP-85 replacement use and what does it limit?

The battery mates with the original Canon BP-85 connector, limiting use to the compatible ES, GL, UC, XL and FR-series camcorders listed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.