We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with dark grey plastic casing and connector socket

Cameron Sino PL200 battery 1600mAh 7.4V

SKU CH-2NXA-27JXA

Lithium-ion replacement battery (1600 mAh, 7.4 V) for LabelManager 360D, 420P and Rhino 4200, 5200 portable printers

  • Specifications67.75 x 41.24 x 23.50
  • Typelithium_ion
  • Battery Pack67.75 x 41.24 x 23.50
  • Battery Typelithium_ion
  • Battery Capacity1600.00 milliamp_hours
  • Battery Voltage7.40 volts
  • Extended run time from 1600 mAh capacity
  • 4 V lithium-ion matches original specs
  • Fits LabelManager 360D, 420P and Rhino models
  • Built-in protection against overcharge and short circuit
  • Ready to use with fully decoded chip

Direct replacement for Dymo label printers

The Cameron Sino PL200 is a 1600mAh 7.4V lithium-ion battery built to fit the LabelManager 360D, LabelManager 420P, LM360D, LM420P, R5200, Rhino 4200, Rhino 420P, Rhino 5200 and Rhino LM 360D. It measures 67.75 x 41.24 x 23.50mm and weighs 80.0g. A fully decoded chip ensures the pack communicates with the printer exactly like the original unit.

Upgrade from depleted or failing OEM packs

When the factory cell no longer holds a charge through a full workday, this 11.84Wh replacement restores the original runtime without modifying the device. The jump is worth it if the printer shuts down early, shows erratic battery-level readings or has been stored for long periods. Not for users who need a higher-capacity pack than 1600mAh or a different voltage.

Limited to the listed Dymo models and 7.4V chemistry

The pack only works in the specific LabelManager and Rhino printers named above; it will not fit other Dymo series or third-party label makers. Its lithium-ion chemistry requires the printer's own charging circuit and must not be charged with an external adapter. Storage above 60°C or 140°F can damage the cells, so keep spares in a cooler environment.

Highlights

  • Extended run time from 1600 mAh capacity
  • 4 V lithium-ion matches original specs
  • Fits LabelManager 360D, 420P and Rhino models
  • Built-in protection against overcharge and short circuit
  • Ready to use with fully decoded chip

Specifications

BrandCameron Sino
ModelPL200
Part NumberPL-200-BAT
Specifications67.75 x 41.24 x 23.50
Typelithium_ion
Battery Pack67.75 x 41.24 x 23.50
Battery Typelithium_ion
Battery Capacity1600.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

What are the exact dimensions of the PL200 battery so I can confirm it fits my label printer?

The battery measures 67.75 mm by 41.24 mm by 23.50 mm and weighs 80.0 g, matching the original specifications for the listed LabelManager and Rhino models.

Which step during installation is most often missed and causes the printer not to recognise the battery?

The connector must be fully seated until it clicks; a partially inserted plug is the common reason the device does not detect the new pack.

After how many charge cycles will the PL200 reach its full capacity and when should I plan a replacement?

It reaches peak performance after two or three full charge and discharge cycles; replace it when run time drops noticeably or the pack no longer holds a charge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.