Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00990064BTC
In stock
Cameron Sino PA3BP 3500mAh 6.0V Nickel-Zinc Battery
Nickel-zinc replacement battery for Bullard PA30 PAPR and Tri-Filter thermal cameras, 3500mAh at 6.0V with ISO9001, RoHS and CE certification
- Specifications126.92 x 67.27 x 46.92
- Typenickel_zinc
- Battery Pack126.92 x 67.27 x 46.92
- Battery Typenickel_zinc
- Battery Capacity3500.00 milliamp_hours
- Battery Voltage6.00 volts
- Replacement battery for Bullard PA30 PAPR thermal camera
- Nickel-zinc chemistry delivers 3500mAh capacity at 6.0V
- Dimensions 126.92 x 67.27 x 46.92mm fit original compartment
- Certified to ISO9001, RoHS and CE safety standards
- Built-in protection against overcharge, over-discharge and short circuit
Replacement Battery for Bullard PA30 PAPR
This nickel-zinc pack replaces the original Bullard PA3BP battery used in PA30 PAPR Tri-Filter thermal camera systems. It delivers 6.0 volts and 3500mAh capacity for 21.00Wh of energy. The fully decoded chip communicates with the device exactly like the factory unit. Professional operators who rely on continuous respiratory protection can swap cells without tools.
Fits Existing Charger and Housing
The pack measures 126.92 x 67.27 x 46.92mm and weighs 292.0g, matching the OEM footprint so it slides into the current battery compartment. No adapter cables or firmware updates are required; the original charger recognises the cell immediately. Built-in protection guards against overcharge, over-discharge, over-voltage and short-circuit events. Buyers who need a different voltage or a hot-swappable dual-pack configuration will not be served by this single-unit design.
Steady Output During Long Shifts
Nickel-zinc chemistry maintains a stable voltage plateau across the discharge curve, so the thermal camera receives consistent power throughout a full 12-hour shift. The pack reaches peak capacity after two or three complete charge cycles. Storage above 60°C or 140°F degrades cycle life, so keep spares in a climate-controlled locker. Users expecting rapid-recharge bursts or extreme sub-zero operation should evaluate alternative chemistries.
Highlights
- Replacement battery for Bullard PA30 PAPR thermal camera
- Nickel-zinc chemistry delivers 3500mAh capacity at 6.0V
- Dimensions 126.92 x 67.27 x 46.92mm fit original compartment
- Certified to ISO9001, RoHS and CE safety standards
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | cameron sino |
|---|---|
| Model | PA30 PAPR, Tri-Filter |
| Part Number | PA3BP |
| Specifications | 126.92 x 67.27 x 46.92 |
| Type | nickel_zinc |
| Battery Pack | 126.92 x 67.27 x 46.92 |
| Battery Type | nickel_zinc |
| Battery Capacity | 3500.00 milliamp_hours |
| Battery Voltage | 6.00 volts |
Questions about this item
How long will the 3500 mAh capacity last during a full shift with the Bullard PA30 PAPR?
The 3500 mAh nickel-zinc pack is rated at 21.00 Wh and 6.0 V, so runtime depends on the respirator's power draw; expect performance to match the original Bullard PA3BP specification.
Does the nickel-zinc chemistry run hot or make noise when the PAPR operates continuously?
Nickel-zinc cells generate minimal heat and no audible noise under normal load; the pack includes over-charge, over-discharge, over-voltage and short-circuit protection to keep temperatures stable.
Which original Bullard part number must I match before ordering this replacement?
Verify that your current battery carries part number PA3BP; this Cameron Sino pack is built to the exact 126.92 x 67.27 x 46.92 mm dimensions and 6.0 V specification for that model.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
