We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black battery pack with gold contacts and Cameron Sino label

Cameron Sino NP-FM50 1300mAh camera battery

SKU CH-GTR7-JYS7S

Replaces Sony NP-FM50 batteries in Handycam and Mavica models with a 1300 mAh 7.4 V cell

  • Pack55.70 x 38.40 x 20.50
  • Capacity1300mAh
  • CompatibilitySony
  • Replaces original Sony NP-FM30, NP-FM50, NP-FM51, NP-QM50, NP-QM51 batteries
  • Powers compatible Sony Handycam and MVC models including CCD-TR108, HVR-A1 series
  • Delivers 1300mAh capacity at 7.4V for extended recording time
  • Built with overcharge, over-discharge, over-voltage and short-circuit protection
  • ISO9001, RoHS and CE certified with shock-absorbing foam packaging

Replacement battery for Sony camcorders

The Cameron Sino NP-FM50 is a 1300mAh lithium-ion pack built to the same electrical and mechanical specifications as the original Sony battery. It fits a long list of Handycam and Digital8 models including the CCD-TR108, CCD-TR208, CCD-TR408, HVR-A1 series and MVC-CD200 through MVC-CD500. The 7.4 V cell weighs 75 g and measures 55.70 x 38.40 x 20.50 mm.

Protections and decoded chip

The cell includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. A fully decoded chip communicates with the camcorder exactly like the factory pack, so remaining-capacity readouts and charge control work normally. The retail box contains shock-absorbing foam to protect the battery during transit.

Check model and part numbers

Verify that your camcorder or original battery carries one of the listed Sony model numbers or the part numbers NP-FM30, NP-FM50, NP-FM51, NP-QM50 or NP-QM51. The connector must match the camera's socket and the physical dimensions must fit the battery compartment. A new pack reaches full performance after two or three complete charge cycles.

Highlights

  • Replaces original Sony NP-FM30, NP-FM50, NP-FM51, NP-QM50, NP-QM51 batteries
  • Powers compatible Sony Handycam and MVC models including CCD-TR108, HVR-A1 series
  • Delivers 1300mAh capacity at 7.4V for extended recording time
  • Built with overcharge, over-discharge, over-voltage and short-circuit protection
  • ISO9001, RoHS and CE certified with shock-absorbing foam packaging

Specifications

BrandCameron Sino
ModelSony DCR-PC100 DCR-PC105 DCR-TRV8 DCR-TRV40 CCD-TRV438E DCR-PC115E DCR-TRV230E DCR-TRV480E DCR-DVD201 DCR-TRV6 DCR-TRV239 CCD-TRV418E
Part NumberSony NP-FM30 NP-FM50 NP-FM51 NP-QM50 NP-QM51
Pack55.70 x 38.40 x 20.50
Capacity1300mAh
CompatibilitySony

Questions about this item

How long until the 1300mAh NP-FM50 pack needs replacement?

A new battery reaches its best performance after two or three full charge-and-discharge cycles and should be replaced when runtime drops noticeably below the original 1300mAh rating.

What stops the NP-FM50 first during continuous recording?

The 1300mAh capacity is the limiting factor; once the charge is depleted the camera will shut down until the pack is recharged.

Does the NP-FM50 get hot or draw extra power when used all day?

The pack weighs 75g and measures 55.70 x 38.40 x 20.50mm; it has built-in over-voltage and short-circuit protection but no active cooling, so extended use may warm the casing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.