We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver camera battery with branded label and gold contacts

Cameron Sino NP-E2 1200mAh 12.0V nickel-zinc camera battery

SKU CH-EPPZ-TC66S

Replacement nickel-zinc battery for Canon EOS-1V and EOS-3 cameras with 1200mAh capacity and 12.0V output

  • Typenickel_zinc
  • Pack131.87 x 59.00 x 39.18
  • Chemicalnickel_zinc
  • Capacity1200.00 milliamp_hours
  • 1200 mAh nickel-zinc chemistry powers Canon EOS-1V and EOS-3 for extended shooting
  • 0 V output matches original Canon NP-E2 specification for reliable camera operation
  • Fully decoded chip communicates with camera firmware exactly like the original battery
  • Compact 131.87 x 59.00 x 39.18 mm form factor fits battery compartment without modification
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection safeguards battery life

Replacement Battery for Canon EOS-1V and EOS-3

This Cameron Sino battery replaces the Canon NP-E2 pack for EOS-1V and EOS-3 film cameras. It uses nickel-zinc chemistry rated at 1200mAh and 12.0V. A fully decoded chip communicates with the camera body just like the original unit.

Suits owners of Canon EOS-1V

Photographers using other Canon models or different battery part numbers should look elsewhere. The pack is a single-unit replacement and does not fit cameras requiring smaller or differently keyed cells.

1200mAh nickel-zinc capacity at 12.0V

Capacity and voltage determine how many frames you can shoot per charge and whether the camera meters correctly. Verify your original battery shows 1200mAh and 12.0V before ordering.

Highlights

  • 1200 mAh nickel-zinc chemistry powers Canon EOS-1V and EOS-3 for extended shooting
  • 0 V output matches original Canon NP-E2 specification for reliable camera operation
  • Fully decoded chip communicates with camera firmware exactly like the original battery
  • Compact 131.87 x 59.00 x 39.18 mm form factor fits battery compartment without modification
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection safeguards battery life

Specifications

BrandCameron Sino
ModelReplacement battery
Part Number2418A001, NP-E2
Typenickel_zinc
Pack131.87 x 59.00 x 39.18
Chemicalnickel_zinc
Capacity1200.00 milliamp_hours

Questions about this item

Which Canon camera bodies accept the NP-E2 12.0 V 1200 mAh nickel-zinc pack?

The battery is listed as compatible with the Canon EOS-1V and EOS-3 film cameras.

Does the replacement pack fit the original battery compartment without modification?

Dimensions are 131.87 x 59.00 x 39.18 mm and weight is 37.9 g, matching the original NP-E2 form factor.

How can I confirm the decoded chip is communicating correctly after installation?

The camera’s battery-info screen should display a normal charge level and remaining-shot count without error messages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.