We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark grey plastic casing, gold connector pins visible

Cameron Sino MT-1000C-BTP 2100mAh Standard Battery

SKU CH-Q0F9-B0NBT

A 2100 mAh replacement battery for Crestron and URC touchpanels and remotes

  • Specifications65.16 x 58.89 x 4.57
  • Battery Pack65.16 x 58.89 x 4.57
  • Battery Capacity2100 milliamp_hours
  • 2100 mAh capacity powers compatible touchpanels and remotes for extended use
  • 7 V lithium-ion cell matches original voltage specifications exactly
  • 16 x 58.89 x 4.57 mm form factor fits URC MX-3000 and Crestron MT-1000C devices
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO9001, RoHS and CE certified for safety and environmental compliance

Replacement battery for Crestron and URC touchpanels

The Cameron Sino MT-1000C-BTP is a 2100mAh lithium-ion pack built to the original dimensions of 65.16 x 58.89 x 4.57mm. It fits Crestron MT-1000C MiniTouch, STX-1700C, TPS-4L and URC MX-3000 series remotes. A decoded chip reports capacity accurately to the host device.

Suitable for owners of listed touchpanels needing

Installers maintaining Crestron or URC control systems can swap the pack without soldering. Buyers whose remotes use a different form factor or voltage should look elsewhere. The pack is not designed for high-drain devices beyond the specified models.

2100mAh capacity at 3.7V delivers 7.77Wh of energy

Typical remote-control workloads draw modest current, so the cell provides extended runtime between charges. Heavy continuous transmission or backlight use will deplete the pack faster. The protection circuit guards against overcharge, over-discharge and short circuits.

Highlights

  • 2100 mAh capacity powers compatible touchpanels and remotes for extended use
  • 7 V lithium-ion cell matches original voltage specifications exactly
  • 16 x 58.89 x 4.57 mm form factor fits URC MX-3000 and Crestron MT-1000C devices
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO9001, RoHS and CE certified for safety and environmental compliance

Specifications

BrandCameron Sino
ModelC2N-DAP8, CNAMPX-16X60, CNX-PAD8A, MT-100, MT-1000c, MT-1000C MiniTouch Wireless Ha, MT-1000C-DS, STX-1700C, TPS-4L
Part NumberMT-1000C-BTP
Specifications65.16 x 58.89 x 4.57
Battery Pack65.16 x 58.89 x 4.57
Battery Capacity2100 milliamp_hours

Questions about this item

Which devices accept the MT-1000C-BTP 2100mAh battery?

The battery fits Crestron MT-1000C MiniTouch Wireless Handheld Touchpanel, C2N-DAP8, CNAMPX-16X60, CNX-PAD8A, STX-1700C, TPS-4L, MT-1000c, MT-1000C-DS, MT-100 and URC MX-3000, MX-3000i remote controls.

Will the battery work with my existing charger for the URC MX-3000?

Yes, the replacement uses the same 3.7 V chemistry and connector, so the original charger will charge it normally.

How can I confirm the battery is performing correctly after installation?

After 2 to 3 full charge and discharge cycles the runtime should match the 2100mAh rating and the device should report normal voltage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.