Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00991244BTC
In stock
cameron sino MLP4670B1P 10000mAh 3.70V lithium polymer standard battery
Replacement lithium-polymer battery for Maxisys MS906 series diagnostic scanners, 10000mAh at 3.70V with built-in protection circuits
- Specifications114.86 x 70.10 x 9.50
- Typelithium_polymer
- Battery Pack114.86 x 70.10 x 9.50
- Battery Typelithium_polymer
- Battery Capacity10000.00 milliamp_hours
- Battery Voltage3.70 volts
- 10000 mAh capacity powers extended diagnostic sessions
- 70 V lithium-polymer chemistry matches original specifications
- 86 x 70.10 x 9.50 mm form factor fits Maxisys MS906 series scanners
- Decoded chip enables direct communication with the scanner
- ISO9001, RoHS and CE certified for safety compliance
Replacement battery for Autel MaxiSys scanners
This lithium-polymer pack is built to fit the MaxiSys MS906BT, MS906TS and MS906S diagnostic scanners. It delivers 10000mAh at 3.70V and matches the original MLP4670B1P part number. The pack measures 114.86 x 70.10 x 9.50mm and weighs 169.4g. It carries ISO9001, RoHS and CE certification.
Upgrading from a degraded original pack
Replace the factory cell when the scanner no longer holds a full day of charge or shuts down during a job. The jump is worth it if the original battery has swollen, reports a false percentage or cannot complete a 24-hour shift. A fresh pack restores the 37.00Wh capacity the tool was designed around.
Straightforward swap with a few cautions
Installation videos are widely available and the decoded chip is recognised immediately by the scanner. Connect the plug carefully and run two or three full charge cycles before relying on the gauge. Do not use low-quality chargers and never store the unit above 60°C.
Highlights
- 10000 mAh capacity powers extended diagnostic sessions
- 70 V lithium-polymer chemistry matches original specifications
- 86 x 70.10 x 9.50 mm form factor fits Maxisys MS906 series scanners
- Decoded chip enables direct communication with the scanner
- ISO9001, RoHS and CE certified for safety compliance
Specifications
| Brand | cameron sino |
|---|---|
| Model | Bissell ICONpet Cordless 2288 Maxisys MS906TS MS906S MS906BT MS906TS |
| Part Number | Skullcandy MLP4670B1P |
| Specifications | 114.86 x 70.10 x 9.50 |
| Type | lithium_polymer |
| Battery Pack | 114.86 x 70.10 x 9.50 |
| Battery Type | lithium_polymer |
| Battery Capacity | 10000.00 milliamp_hours |
| Battery Voltage | 3.70 volts |
Questions about this item
What are the exact dimensions of the MLP4670B1P battery for the Maxisys MS906TS?
The battery measures 114.86 x 70.10 x 9.50 mm and weighs 169.4 g, matching the original pack size for the Maxisys MS906BT, MS906TS, MS906S and MS906TS scanners.
Which step do installers most often miss when fitting this 10000mAh pack into a Maxisys MS906BT?
The connector must be fully seated and locked before closing the case; a loose plug causes the scanner to reject the new battery even though the voltage and capacity are correct.
After how many full charge cycles will the 3.70 V lithium polymer cell reach its rated 10000mAh capacity?
The manufacturer states the cell delivers its best performance after 2 or 3 complete charge and discharge cycles when first installed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
