We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium polymer battery pack, matte finish, 69 by 56 by 19 mm, Brady M511 replacement

Cameron Sino M511 Y5087828 2600mAh 10.8V standard battery

SKU CH-DEMZ-DWYMJ

Lithium-polymer replacement battery for Brady M511 label printers, 2600 mAh at 10.8 V with ISO9001, RoHS and CE certification

  • Specifications69.00 x 56.00 x 19.00
  • Typelithium_polymer
  • Battery Pack69.00 x 56.00 x 19.00
  • Battery Typelithium_polymer
  • Battery Capacity2600.00 milliamp_hours
  • Battery Voltage10.80 volts
  • Replacement for Brady M511 label printers
  • 2600 mAh capacity supports extended field use
  • 8 V lithium-polymer chemistry matches original spec
  • Compact 69.00 x 56.00 x 19.00 mm form factor
  • Built-in overcharge and short-circuit protection

Compatible replacement for Brady M511

This lithium-polymer battery replaces the original Brady Y5087828 pack used in the M511 label printer. It delivers 2600mAh at 10.8V for 28.08Wh of capacity. The fully decoded chip communicates with the printer exactly like the factory unit. Installers can follow widely available online videos for a straightforward swap.

Thermal behaviour and power draw

Lithium-polymer chemistry keeps self-discharge low during indoor or outdoor use. The pack includes over-charge, over-discharge, over-voltage and short-circuit protection circuits that limit heat build-up during normal charge and discharge cycles. No active cooling is required and the cell runs silently. A fresh unit reaches full runtime after two or three complete charge cycles.

Build quality and daily implications

The pack measures 69.00 x 56.00 x 19.00mm and weighs 148.0g, matching the original form factor so the battery door closes without modification. Shock-absorbing foam in the packaging protects the cells during transit. ISO9001, RoHS and CE certifications confirm compliance with standard safety and environmental requirements. The connector aligns with the M511 socket for a secure fit.

Highlights

  • Replacement for Brady M511 label printers
  • 2600 mAh capacity supports extended field use
  • 8 V lithium-polymer chemistry matches original spec
  • Compact 69.00 x 56.00 x 19.00 mm form factor
  • Built-in overcharge and short-circuit protection

Specifications

BrandCameron Sino
ModelM511
Part NumberY5087828
Specifications69.00 x 56.00 x 19.00
Typelithium_polymer
Battery Pack69.00 x 56.00 x 19.00
Battery Typelithium_polymer
Battery Capacity2600.00 milliamp_hours
Battery Voltage10.80 volts

Questions about this item

How do I install this battery in my Brady M511, and what connector mistake should I avoid?

Align the replacement pack with the M511 compartment and press until the connector seats fully; the supplier notes that a loose connector is the common error that prevents the device from recognising the new 2600 mAh pack.

What maintenance will this lithium-polymer pack need over its service life?

No scheduled maintenance is required; after the first two or three full charge-discharge cycles the 10.8 V cell reaches optimal capacity, and the built-in protection circuit manages over-charge, over-discharge and short-circuit safety automatically.

What is the first limit I will hit when running the Brady M511 continuously on this 28.08 Wh battery?

The 2600 mAh capacity sets the runtime ceiling; under sustained load the pack will deplete before any thermal or voltage protection activates, so plan for a recharge once the stored energy is exhausted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.