Cameron Sino M3AEBT 500mAh 3.7V cell phone battery
500 mAh 3.7 V replacement cell fits Sennheiser Momentum True Wireless 2 and related headsets
- Typeaaa
- Capacity500mAh / 1.85Wh
- Weight35.2
- Replaces original battery in multiple Momentum headset models
- 500mAh capacity delivers 1.85Wh of runtime
- 00 x 25.00 x 6.00mm form factor fits precisely
- Built-in protection guards against overcharge and short circuit
- ISO9001, RoHS and CE certified for safety compliance
Replacement cell for Momentum True Wireless headsets
The Cameron Sino M3AEBT is a 3.7V 500mAh lithium cell built to the original 36.00 x 25.00 x 6.00mm footprint. It fits the Momentum 3 Wireless, Momentum True Wireless 2 and related models listed under part number AHB702535PCT-01. The pack weighs 10.2g and carries ISO9001, RoHS and CE certification. Buyers who need a higher-capacity pack or a different form factor cannot use this cell.
Thermal behaviour and power profile
Rated at 1.85Wh, the cell delivers the same voltage and capacity as the factory unit, so discharge curves and run-time remain unchanged. Normal use inside the sealed earbud enclosure keeps temperatures well below the 60 140 storage limit. No active cooling is required and the protection circuit guards against over-charge, over-discharge, over-voltage and short-circuit. Users who expect the battery to power larger devices will find the energy reserve insufficient.
Included hardware and installation notes
The retail box contains one AAA-size cell wrapped in shock-absorbing foam for transit protection. A fully decoded chip ensures the headset recognises the pack immediately without firmware updates. The manufacturer notes that two or three full charge-discharge cycles bring the cell to peak capacity. Installers who cannot access the internal connector or lack suitable tools will not be able to complete the swap.
Highlights
- Replaces original battery in multiple Momentum headset models
- 500mAh capacity delivers 1.85Wh of runtime
- 00 x 25.00 x 6.00mm form factor fits precisely
- Built-in protection guards against overcharge and short circuit
- ISO9001, RoHS and CE certified for safety compliance
Specifications
| Brand | Cameron Sino |
|---|---|
| Series | 36.00 x 25.00 x 6.00mm |
| Model | M3AEBT, M3IETW, Momentum 3 Wireless, Momentum True Wireless, Momentum True Wireless 2, Momentum True Wireless 2 Charg, Momentum True Wireless Charing, Momentum True Wireless MTW |
| Type | aaa |
| Part Number | AHB702535PCT-01 |
| Capacity | 500mAh / 1.85Wh |
| Weight | 35.2 |
Questions about this item
How do I install the M3AEBT battery in my Momentum True Wireless 2 headset and what step do people often miss?
Open the earbud casing, disconnect the original pack, and connect the new AHB702535PCT-01 connector firmly until it clicks; the step many miss is seating the connector fully so the 3.7 V rail makes proper contact.
What maintenance or replacement will this 500 mAh cell need later?
After roughly two to three full charge-discharge cycles the battery reaches its best capacity; no user maintenance is required, but the cell should be replaced once runtime drops noticeably below the original 1.85 Wh level.
What limit appears first during sustained use of this 10.2 g battery?
The protection circuit will cut output if the pack temperature approaches 60 °C or if voltage falls below the safe threshold, preventing over-discharge during long listening sessions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Shenzhen LVSUN Electronics Co. Ltd G20-MBAT cell phone battery 1600mAh 3.7V
LG Electronics BL-53QH 2100 mAh cell phone battery (2 pack)
- Replacement Battery
- LG



