Cameron Sino LP-E10 950mAh 7.4V camera battery
Replacement lithium-ion battery with 950 mAh capacity and 7.4 V output for compatible Canon EOS cameras
- Typelithium_ion
- Pack49.00 x 36.00 x 15.00
- Chemicallithium_ion
- Capacity950.00 milliamp_hours
- CompatibilityCamera
- Replacement for Canon EOS 1100D, 1200D, 1300D, Kiss X50, Rebel T3, T5
- 950 mAh capacity at 7.4 V delivers 7.03 Wh for extended shooting
- Fully decoded chip works like the original battery in compatible cameras
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Compact 49.00 x 36.00 x 15.00 mm size weighs 45.4 g
Compatible Canon models
This replacement battery fits Canon EOS 1100D, 1200D, 1300D, 4000D, Kiss X50, Kiss X70, Kiss X90, Rebel T3, T5 and T6 cameras. It is built for photographers who need a reliable spare or a direct replacement for the original LP-E10 pack. The lithium-ion cell delivers 950mAh capacity at 7.4V for everyday shooting.
Sustained shooting performance
The 950mAh cell provides consistent power for extended sessions rather than brief bursts. A fully decoded chip communicates accurately with the camera body so remaining charge is reported correctly. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits to maintain safe operation over many cycles.
Pre-order checklist
Confirm your camera model appears in the supported list and that your original battery carries the LP-E10 part number. Verify the pack dimensions of 49.00 x 36.00 x 15.00mm match the compartment. Plan for two or three full charge and discharge cycles to reach optimal runtime.
Highlights
- Replacement for Canon EOS 1100D, 1200D, 1300D, Kiss X50, Rebel T3, T5
- 950 mAh capacity at 7.4 V delivers 7.03 Wh for extended shooting
- Fully decoded chip works like the original battery in compatible cameras
- Built-in protection against overcharge, over-discharge, over-voltage and short circuit
- Compact 49.00 x 36.00 x 15.00 mm size weighs 45.4 g
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DS126291, DS126491, DS126621, EOS 1100D, EOS 1200D, EOS 1300D, EOS 4000D, EOS KISS X50, EOS Kiss X70, EOS Kiss X90, EOS Rebel 1300D T6, EOS REBEL T3, EOS REBEL T5, EOS Rebel T6, iGuide IMS-5 |
| Part Number | LP-E10 |
| Type | lithium_ion |
| Pack | 49.00 x 36.00 x 15.00 |
| Chemical | lithium_ion |
| Capacity | 950.00 milliamp_hours |
| Compatibility | Camera |
Questions about this item
How hot does the LP-E10 battery get during a full day of shooting?
The lithium-ion cell runs at normal operating temperature; the built-in protection circuit guards against over-voltage and short-circuit conditions that could raise heat.
Which Canon charger works with this 7.4 V 950 mAh pack?
It fits the original Canon LC-E10 charger supplied with EOS 1100D, 1200D, 1300D, Rebel T3, T5 and T6 bodies.
Will the decoded chip communicate correctly with my EOS 1100D firmware?
Yes, the fully decoded chip reports capacity and health exactly like the genuine LP-E10, so the camera’s battery-info screen works normally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



