We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark grey plastic casing, labelled Cameron Sino Infinity M300 2200mAh 3.7V

Cameron Sino Infinity M300 Battery 2200mAh 3.7V MS16814 MS20335

SKU CH-9MJ6-7RB9T

Replacement lithium-ion battery for the Dräger Infinity M300 medical monitor, 2200 mAh at 3.7 V with a fully decoded chip

  • Specifications66.42 x 19.70 x 22.68
  • Battery Pack66.42 x 19.70 x 22.68
  • Battery Capacity2200 milliamp_hours
  • Battery Voltage3.7 volts
  • 2200 mAh capacity powers the Drager Infinity M300 for extended monitoring
  • 7 V lithium-ion cell matches original voltage for reliable operation
  • 42 × 19.70 × 22.68 mm form factor fits the device battery compartment exactly
  • ISO9001, RoHS and CE certified for medical-grade safety compliance
  • Built-in protection circuit guards against overcharge, over-discharge and short circuit

Cameron Sino Battery for Drager Infinity M300

This replacement battery delivers 2200 mAh at 3.7 V for the Drager Infinity M300 medical monitor. It matches the original MS16814 and MS20335 part numbers and measures 66.42 x 19.70 x 22.68 mm. A built-in protection circuit guards against overcharge, over-discharge and short circuits. The unit weighs 51.8 g and is supplied new with ISO9001, RoHS and CE certification.

Compatibility and limits

It suits technicians restoring a Drager Infinity M300 to factory runtime. Buyers who need a different voltage, a higher capacity or a battery for another monitor model cannot use this part. The pack is a single-cell lithium-ion design, so it will not fit devices that require multi-cell configurations or proprietary connector layouts.

Deciding specification

The 3.7 V / 2200 mAh (8.14 Wh) rating is the single figure that confirms whether this pack matches the original equipment requirement. Verify the device label shows exactly 3.7 volts and the MS16814 or MS20335 part number before ordering.

Highlights

  • 2200 mAh capacity powers the Drager Infinity M300 for extended monitoring
  • 7 V lithium-ion cell matches original voltage for reliable operation
  • 42 × 19.70 × 22.68 mm form factor fits the device battery compartment exactly
  • ISO9001, RoHS and CE certified for medical-grade safety compliance
  • Built-in protection circuit guards against overcharge, over-discharge and short circuit

Specifications

BrandCS Cameron Sino
ModelInfinity M300
Part NumberMS16814, MS20335
Specifications66.42 x 19.70 x 22.68
Battery Pack66.42 x 19.70 x 22.68
Battery Capacity2200 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

How many charge cycles can the 2200 mAh lithium-ion cell handle before it needs replacing?

The battery is built to the same specifications as the original Drager MS16814 and MS20335 packs and includes overcharge, over-discharge and short-circuit protection to maximise cycle life.

What is the first limit reached during continuous operation of the 3.7 V Infinity M300 battery?

The 2200 mAh / 8.14 Wh capacity defines the runtime ceiling; once that energy is depleted the monitor must be recharged or the pack swapped.

How much heat does the 51.8 g battery generate when the Drager Infinity M300 runs all day?

Normal operation stays within the 60 °C storage limit; the decoded chip manages charge current to keep temperature rise low during extended shifts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.