Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00990064BTC
In stock
Cameron Sino HYLB-1469 2600mAh 11.1V NiZn battery
Nickel-zinc replacement battery for vital signs monitors, 2600mAh at 11.1V with ISO9001, RoHS and CE certification
- Specifications1
- Typenickel_zinc
- Battery Pack1
- Battery Typenickel_zinc
- Battery Capacity2600.00 milliamp_hours
- Battery Voltage11.10 volts
- Compatible with Vital Signs Monitor HYLB-1469
- 2600mAh 11.1V NiZn chemistry delivers 28.86Wh
- Compact 67.00 x 55.00 x 20.00mm form factor
- Built-in protection against overcharge and short circuit
- ISO9001 RoHS CE certified for medical use
Direct Replacement for Biocare Vital Signs Monitors
This nickel-zinc battery pack matches the original HYLB-1469 part number for compatible Biocare vital signs monitors. It supplies 11.1 volts and 2600 milliamp hours of capacity for medical monitoring equipment. The fully decoded chip communicates with the device exactly like the factory cell. Technicians can swap the pack without proprietary tools.
2600 mAh Capacity and 28.86 Wh Energy Reserve
The pack delivers 28.86 watt-hours, supporting extended shifts on a single charge in typical spot-check workflows. Runtime scales with display brightness, alarm frequency and wireless module activity. Heavy continuous monitoring will deplete the reserve faster than intermittent spot checks. A new cell reaches full capacity after two or three complete charge cycles.
Nickel-Zinc Chemistry Limits and Safety Notes
Nickel-zinc cells operate at a higher nominal voltage than nickel-metal-hydride alternatives, so the monitor must be designed for 11.1 volts. Do not charge with unapproved adapters or disassemble the sealed pack. Storage above 60 degrees Celsius risks permanent capacity loss. The built-in protection circuit guards against overcharge, over-discharge and short circuits.
Highlights
- Compatible with Vital Signs Monitor HYLB-1469
- 2600mAh 11.1V NiZn chemistry delivers 28.86Wh
- Compact 67.00 x 55.00 x 20.00mm form factor
- Built-in protection against overcharge and short circuit
- ISO9001 RoHS CE certified for medical use
Specifications
| Brand | cameron sino |
|---|---|
| Model | Biocare Vital Signs Monitor |
| Part Number | Biocare HYLB-1469 |
| Specifications | 1 |
| Type | nickel_zinc |
| Battery Pack | 1 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2600.00 milliamp_hours |
| Battery Voltage | 11.10 volts |
Questions about this item
Will the HYLB-1469 2600mAh 11.1V NiZn battery fit my existing Vital Signs Monitor without modification?
The replacement matches the original 67.00 x 55.00 x 20.00 mm dimensions and uses a fully decoded chip so it works like the factory pack in compatible Vital Signs Monitors.
How can I confirm the 11.1V NiZn pack is operating correctly after installation?
After two or three full charge and discharge cycles the battery reaches its rated 2600mAh capacity and the monitor should report normal runtime without unexpected shutdowns.
Does the HYLB-1469 box include a charger or only the 140.0g battery pack?
The package contains the single nickel-zinc battery pack with protective foam; a compatible charger for the Vital Signs Monitor must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
