We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium polymer battery pack, dark casing, connector on one end

Cameron Sino HX1 lithium polymer dry cell battery 2500mAh 63.0Wh

SKU CH-ZAZP-VHPCP MPN HX1

Lithium-polymer replacement battery delivering 2500mAh and 63.0Wh for compatible Miele Triflex HX1, HX2 and Facelift models

  • Typelithium_polymer
  • Capacity (mAh)2500mAh / 63.0Wh
  • 2500mAh capacity powers extended cleaning sessions with 63.0Wh energy rating
  • Lithium polymer chemistry delivers reliable output at 3.82V nominal voltage
  • Certified to ISO9001, RoHS and CE standards for safety and quality assurance
  • Direct replacement for Miele HX1, HX1 Facelift, HX2 and Triflex series models
  • Brand-new condition ensures full performance from first use

Compatible Miele Vacuum Models

This lithium polymer replacement battery fits Miele HX1, HX1 Facelift, HX2, Triflex HX1, Triflex HX1 Facelift and Triflex HX2 cordless vacuums. It delivers a capacity of 2500mAh and 63.0Wh at a nominal voltage of 3.82V. The cell is certified to ISO9001, RoHS and CE standards. It replaces original part numbers 1010042, 11384710, AP01, AP02 and HS19.

Installation Notes

The pack is designed as a direct swap for the original battery, so no soldering or special tools are required. Align the connector carefully; forcing it can bend the pins. A common issue is residual charge in the old pack causing a brief error code — simply let the vacuum sit for a minute after removal before fitting the new unit. Ensure the battery clicks fully into the housing to maintain proper contact.

Pre-Purchase Checks

Verify that your vacuum model appears in the supported list above; the battery is not suitable for other Miele ranges or non-Miele machines. Confirm the original part number on your existing pack matches one of the listed references. Check that the charging dock and firmware are functioning normally, as a faulty charger will not revive a worn cell. Buyers needing a higher capacity than 2500mAh or a different voltage should look elsewhere.

Highlights

  • 2500mAh capacity powers extended cleaning sessions with 63.0Wh energy rating
  • Lithium polymer chemistry delivers reliable output at 3.82V nominal voltage
  • Certified to ISO9001, RoHS and CE standards for safety and quality assurance
  • Direct replacement for Miele HX1, HX1 Facelift, HX2 and Triflex series models
  • Brand-new condition ensures full performance from first use

Specifications

BrandCameron Sino
ModelHX1, HX1 Facelift, HX2, HX2 Pro, Soml0, Triflex HX1, Triflex HX1 Facelift, Triflex HX2, Triflex HX2 Pro
Typelithium_polymer
Capacity (mAh)2500mAh / 63.0Wh

Questions about this item

How can I confirm the 2500mAh battery is working correctly after installing it in my Miele Triflex HX1?

The vacuum should power on and run for a duration consistent with a 63.0Wh lithium polymer cell. Charge it fully, then complete a normal cleaning cycle to verify expected runtime.

What is included with the Cameron Sino HX1 replacement battery and what must I purchase separately?

The package contains the 2500mAh lithium polymer battery only. No charger, tools or mounting hardware are supplied; reuse the original Miele charger and any retaining clips from the old pack.

Which Cameron Sino model matches my Miele Triflex HX2 Pro vacuum?

This HX1 battery is compatible with the Triflex HX2 Pro as listed. It replaces Miele part numbers 1010042 and 11384710, so select this single 2500mAh version for those models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.